On Sat, Jul 16, 2016 at 07:44:17AM -0600, Aaron Bieber wrote: > Hola, > > It seems there is an issue on the PandaBoard ES - it doesn't want to > display anything after booting the kernel: > > cannot open sd0a:/etc/random.seed: No such file or directory > booting sd0a:/bsd: 2091172+7928680+435444 [64+297456+142800]=0xa659d0 > > Not sure if it needs to be told where the output should go, or what. I > tried doing a "set tty com0" which resulted in: > > com0 not a console device > > Any suggestions? > > Cheers, > Aaron >
The console appears to be on 0x48020000 but the dtb does not set stdout-path. Try http://jsg.id.au/openbsd/omap4-panda-es.dtb Index: Makefile =================================================================== RCS file: /cvs/ports/sysutils/dtb/Makefile,v retrieving revision 1.1.1.1 diff -u -p -r1.1.1.1 Makefile --- Makefile 29 May 2016 02:07:26 -0000 1.1.1.1 +++ Makefile 16 Jul 2016 14:03:11 -0000 @@ -2,6 +2,7 @@ COMMENT= Device Tree Blobs DISTNAME= linux-4.6 +REVISION= 0 PKGNAME= ${DISTNAME:S/linux/dtb/} CATEGORIES= sysutils HOMEPAGE= http://www.devicetree.org --- /dev/null Sun Jul 17 00:20:30 2016 +++ patches/patch-arch_arm_boot_dts_imx6q-cm-fx6_dts Sun Jul 17 00:16:07 2016 @@ -0,0 +1,14 @@ +$OpenBSD$ +--- arch/arm/boot/dts/imx6q-cm-fx6.dts.orig Sun Jul 17 00:15:03 2016 ++++ arch/arm/boot/dts/imx6q-cm-fx6.dts Sun Jul 17 00:15:38 2016 +@@ -22,6 +22,10 @@ + reg = <0x10000000 0x80000000>; + }; + ++ chosen { ++ stdout-path = &uart4; ++ }; ++ + leds { + compatible = "gpio-leds"; + --- /dev/null Sun Jul 17 00:20:44 2016 +++ patches/patch-arch_arm_boot_dts_omap4-panda-common_dtsi Sun Jul 17 00:18:52 2016 @@ -0,0 +1,14 @@ +$OpenBSD$ +--- arch/arm/boot/dts/omap4-panda-common.dtsi.orig Sun Jul 17 00:18:27 2016 ++++ arch/arm/boot/dts/omap4-panda-common.dtsi Sun Jul 17 00:18:44 2016 +@@ -13,6 +13,10 @@ + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + ++ chosen { ++ stdout-path = &uart3; ++ }; ++ + aliases { + display0 = &dvi0; + display1 = &hdmi0;
