I was able to boot with the latest snapshot, and it finds both disks.
Unfortunately I still get the "newfs: wtfs: write error on block 160:
Input/output error".
Using miniroot-am335x-60.fs 31-May-2016 SHA256:
e72bd2b7289c845644e77c7a5f7e83e1463b766325a97ace898d0a74cc0dd5e0
On Mon, May 30, 2016 at 1:47 AM, Jonathan Gray <j...@jsg.id.au> wrote:
> I think this is a result of the miniroot not flagging the fat fs
> as active ("f 0" in fdisk). The miniroots that should be appearing
> on mirrors soon have this added back.
>
> SHA256 (miniroot-am335x-60.fs) =
> 09c55837fd44ad60ab126553bb0506b8ab4cf6d1db7c44a98faf510e8d78ee71
>
> On Sun, May 29, 2016 at 11:54:04PM +0200, Farid Joubbi wrote:
> > Unfortunately the latest snapshot does not boot at all.
> > It's the miniroot-am335x-60.fs 28-May-2016 09:47 18M md5sum:
> > 3b6d31fa5325bbc063a2f9f78dc6e253
> >
> > All I get is CCCCCCCCCCCCC
> >
> >
> >
> >
> > On Sun, May 29, 2016 at 4:19 PM, Jonathan Gray <j...@jsg.id.au> wrote:
> >
> > > On Sat, May 28, 2016 at 11:49:07PM +0200, Farid Joubbi wrote:
> > > > Hi,
> > > >
> > > > Since it's not possible to install 5.9 release on the internal
> storage, I
> > > > figured that I will try the latest snapshot from May 27th.
> > > >
> > > > With the snapshot I am able to choose to install on both sd0 and sd1
> > > which
> > > > was not possible with 5.9.
> > > > The installation goes for a while until I get "newfs: wtfs: write
> error
> > > on
> > > > block 160: Input/output error".
> > > > I think that the hardware is fine since I am able to install and run
> > > debian
> > > > on it without problems.
> > > >
> > > > Any ideas?
> > >
> > > Today's snapshot is built the below diff, I'd be curious if it changes
> > > anything.
> > >
> > > Index: ommmc.c
> > > ===================================================================
> > > RCS file: /cvs/src/sys/arch/armv7/omap/ommmc.c,v
> > > retrieving revision 1.21
> > > diff -u -p -r1.21 ommmc.c
> > > --- ommmc.c 20 May 2016 23:07:05 -0000 1.21
> > > +++ ommmc.c 29 May 2016 14:17:03 -0000
> > > @@ -393,8 +393,10 @@ ommmc_attach(struct device *parent, stru
> > > saa.sct = &ommmc_functions;
> > > saa.sch = sc;
> > > saa.caps = SMC_CAPS_4BIT_MODE;
> > > +#if 0
> > > if (caps & MMCHS_CAPA_HSS)
> > > saa.caps |= SMC_CAPS_MMC_HIGHSPEED;
> > > +#endif
> > >
> > > sc->sdmmc = config_found(&sc->sc_dev, &saa, NULL);
> > > if (sc->sdmmc == NULL) {
> > >
> > > >
> > > >
> > > > Here is the output:
> > > >
> > > > Available disks are: sd0 sd1.
> > > > Which disk is the root disk? ('?' for details) [sd0] sd1
> > > > Disk: sd1 geometry: 465/255/63 [7471104 Sectors]
> > > > Offset: 0 Signature: 0xAA55
> > > > Starting Ending LBA Info:
> > > > #: id C H S - C H S [ start: size ]
> > > >
> > >
> -------------------------------------------------------------------------------
> > > > *0: 0C 0 1 2 - 2 11 9 [ 64: 32768 ]
> Win95
> > > > FAT32L
> > > > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ]
> > > > unused
> > > > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ]
> > > > unused
> > > > 3: A6 2 11 10 - 465 13 60 [ 32832: 7438272 ]
> > > > OpenBSD
> > > > Use (W)hole disk$ or (E)dit the MBR? [whole]
> > > > Creating a msdos partition and an OpenBSD partition for rest of
> > > sd1...done.
> > > > /dev/rsd1i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
> > > > bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63
> > > hds=255
> > > > hid=2048
> > > > newfs_msdos: /dev/rsd1i: Input/output error
> > > > The auto-allocated layout for sd1 is:
> > > > # size offset fstype [fsize bsize cpg]
> > > > a: 879.7M 34816 4.2BSD 2048 16384 1 # /
> > > > b: 239.5M 1836512 swap
> > > > c: 3648.0M 0 unused
> > > > d: 2144.1M 2327008 4.2BSD 2048 16384 1 #
> /usr
> > > > e: 367.7M 6718048 4.2BSD 2048 16384 1 #
> /home
> > > > i: 16.0M 2048 MSDOS
> > > > Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
> > > > /dev/rsd1a: 879.7MB in 1801696 sectors of 512 bytes
> > > > 5 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> > > > newfs: wtfs: write error on block 160: Input/output error
> > > > newfs: reduced number of fragments per cylinder group from 47056 to
> 46872
> > > > to enlarge last cylinder group
> > > > /dev/rsd1e: 367.7MB in 752992 sectors of 512 bytes
> > > > 5 cylinder groups of 91.55MB, 5859 blocks, 11776 inodes each
> > > > newfs: wtfs: write error on block 160: Input/output error
> > > > /dev/rsd1d: 2144.1MB in 4391040 sectors of 512 bytes
> > > > 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> > > > newfs: wtfs: write error on block 160: Input/output error
> > > > Available disks are: sd0.
> > > > Which disk do you wish to initialize? (or 'done') [done]
> > >
>
>
