Hi, I freshly installed the latest snapshot (may 25) on a BeagleBone Black. The install process works flawlessly but it refuses to load the kernel at first boot:
# halt -p syncing disks... done Attempting to power down... The operating system has halted. Please press any key to reboot. rebooting... U-Boot SPL 2016.05 (May 17 2016 - 17:11:59) Trying to boot from MMC1 Card doesn't support part_switch MMC partition switch failed *** Warning - MMC partition switch failed, using default environment reading u-boot.img reading u-boot.img U-Boot 2016.05 (May 17 2016 - 17:11:59 +1000) Watchdog enabled I2C: ready DRAM: 512 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - bad CRC, using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt ** Unable to read file uEnv.txt ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... reading /am335x-boneblack.dtb 32577 bytes read in 8 ms (3.9 MiB/s) Found EFI removable media binary efi/boot/bootarm.efi reading efi/boot/bootarm.efi 65556 bytes read in 12 ms (5.2 MiB/s) ## Starting EFI application at 0x82000000 ... Scanning disks on usb... Scanning disks on mmc... MMC Device 2 not found MMC Device 3 not found Found 2 disks >> OpenBSD/armv7 BOOTARM 0.1 boot> booting sd0a:/bsd: 3691740data abort pc : [<9df293f4>] lr : [<9df2c8e4>] reloc pc : [<7e7d23f4>] lr : [<7e7d58e4>] sp : 9ef35db8 ip : 00000000 fp : 9ef35df0 r10: 9df3382c r9 : 9ef35dc0 r8 : 00000000 r7 : 003854dc r6 : 10300000 r5 : 9de25010 r4 : 00003000 r3 : 00000000 r2 : 00003000 r1 : 9de280e0 r0 : 10300000 Flags: nzCv IRQs off FIQs on Mode SVC_32 Resetting CPU ... resetting ... -- Mattieu Baptiste "/earth is 102% full ... please delete anyone you can."
