Hello, do you have to install u-boot on an SD card?
If so, then the miniroot doesn’t work for you. That particular miniroot expects the board to boot from a u-boot flashed onto an on-board chip. What you can do is flash u-boot to an SD card, put the IMX umg file there and use u-boot commands to load it into u-boot memory and boot it via „bootm“. \Patrick Am 17.09.2014 um 14:44 schrieb Hrishikesh Muruk <hris...@gmail.com>: > Hello > > I am trying to boot OpenBSD on a Freescale iMX6 SABRE Smart Devices board. > This is not the same as SABRE Lite. > > I followed instructions at: > http://ftp.openbsd.org/pub/OpenBSD/5.5/armv7/INSTALL.armv7 > > I copied the miniroot-imx-55.fs file my SD card using dd. I don't see any > output on uart when the board is turned on. > > I have confirmed that the board works by installing and running uboot from > the Freescale BSP. > > Has anyone had success booting OpenBSD on this board? > > If not, any pointers on creating a fs file would be very helpful. > > Thank you, > Hrishi
