Howdy all, I need some clarification on whether or not the fdisk output for the 5.5 sunxi installer image is correct.
I downloaded the 5.5 cubieboard/sunxi installer to try it out. This is the snapshot: miniroot-sunxi-55.fs <http://ftp.openbsd.org/pub/OpenBSD/snapshots/armv7/miniroot-sunxi-55.fs> 08-Mar-2014 15:20 18.0M I then wrote it out with this command: dd if=/home/bill/Downloads/miniroot-sunxi-55.fs of=/dev/sdb And then I received two lines of console output when booting, then a halt: U-Boot SPL 2012.10-04280-g1a8ac55 (May 23 2013 - 14:01:59) DRAM: 32MB I did a little checking, and this is what I see when I run fdisk: Disk /dev/sdb: 7969 MB, 7969177600 bytes 255 heads, 63 sectors/track, 968 cylinders, total 15564800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 * 6237 32129 12946+ c W95 FAT32 (LBA) /dev/sdb4 64 32129 16033 a6 OpenBSD It looks like the FAT partition is overlapping the OpenBSD partition, and that the FAT partition is the first, bootable partition but it starts well after the OpenBSD partition, which is the fourth partition. Is it supposed to look like that? I've checked everything else, downloaded the image again, wiped the sd card repeatedly, etc... same results.
