I recently purchased a CubieBoard 2 and I want to install OpenBSD onto an SD card.
I downloaded from snapshots the miniroot-sunxi-55.fs file. I then inserted my SD card into my OpenBSD desktop machine and did a dd if=miniroot-sunxi-55.fs of=/dev/rsd5c After about a minute, the command finished. I then inserted the sd card into the CubieBoard 2, connected a TTL-USB converter to the serial port at 115200 baud and powered up the board. All I get from the serial port is the following 2 lines: U-Boot SPL 2012.10-04280-g1a8ac55 (May 23 2013 - 14:01:59) DRAM: 32MB The board is not responding to any serial input and it is just frozen with these 2 lines of serial output. Any suggestions on how to install the snapshot image onto an SD card for the CubieBoard 2 would be greatly appreciated! Thanks!
