On Oct 30 18:14:42, m...@patrick-wildt.de wrote:
> Hey ARM@,
>
> there?s a new snapshot copied out, which should hit the mirrors in the next
> couple of hours.
> Make sure to check the timestamp. The ?old? one is from the 14th of October.
>
> This one should have the tmux and dmtimer problems removed.
The tmux segfaultage is no more.
This is what the first boot said:
...
setting tty flags
pf enabled
starting network
DHCPDISCOVER on cpsw0 to 255.255.255.255 port 67 interval 1
DHCPOFFER from 192.168.111.1 (00:0d:b9:12:9f:2d)
DHCPREQUEST on cpsw0 to 255.255.255.255 port 67
DHCPACK from 192.168.111.1 (00:0d:b9:12:9f:2d)
bound to 192.168.111.11 -- renewal in 21600 seconds.
openssl: generating isakmpd/iked RSA key... dmtimer_intr: negative duration!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
done.
ssh-keygen: generating new host keys: RSA1 RSA DSA ECDSA
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
kvm_mkdb: can't open /dev/ksyms
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd sendmail sndiod.
fw_update: No devices found which need firmware files to be downloaded.
starting local daemons: cron.
Mon Nov 4 09:37:09 CET 2013
Also,
edma0 at omap0 rev 0.0
appeared that previously was not recognized.
However, there does not seem to be a manpage
for either omap or edma - is that expected
(simply not written yet)?
Thank you!
Jan
OpenBSD 5.4-current (GENERIC-OMAP) #0: Wed Oct 30 15:51:11 CET 2013
r...@imx.office.jasper.la:/usr/src/sys/arch/armv7/compile/GENERIC-OMAP
real mem = 536870912 (512MB)
avail mem = 519208960 (495MB)
mainbus0 at root
cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
omap0 at mainbus0: BeagleBone
prcm0 at omap0 rev 0.2
sitaracm0 at omap0: control module, rev 1.0
intc0 at omap0 rev 5.0
edma0 at omap0 rev 0.0
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
omdog0 at omap0 rev 0.1
ommmc0 at omap0
sdmmc0 at ommmc0
ommmc1 at omap0
sdmmc1 at ommmc1
com0 at omap0: ti16750, 64 byte fifo
com0: console
cpsw0 at omap0: version 1.12 (0), address 90:59:af:5f:1e:3d
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0001f0, model 0x000f
/dev/ksyms: Symbol table not valid.
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 16000MB, 512 bytes/sector, 32768000 sectors
scsibus1 at sdmmc1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 1832MB, 1024 bytes/sector, 1875968 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd0
root on sd0a (21096788797f42d4.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
