Barry, Because of how these arm boards boot we need to create a win partition in addition to the openbsd one. When we create the miniroot we create a minimal parition layout that can be flashed to your sd card. During install this should be blown away and recreated from scratch (the default option) because your sd card is going to be different than the miniroot. Brandon
On Sat, Jul 27, 2013 at 1:58 PM, Barry Grumbine <barry.grumb...@gmail.com> wrote: > Hi, > > I'm playing with the new beagle port on a BeagleBone Black. After > dd'ing the miniroot-am335x-54.fs image to microsd I had to delete the > existing OpenBSD partition and re-create it after the FAT32 partition. > It looks like all three of the miniroot images have this problem. > > $ sudo vnconfig vnd0 miniroot-am335x-54.fs > $ sudo fdisk vnd0 > Disk: vnd0 geometry: 368/1/100 [36864 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ------------------------------------------------------------------------------- > *0: 0C 0 0 64 - 321 0 30 [ 63: 32067 ] Win95 > FAT32L > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 3: A6 0 0 65 - 321 0 30 [ 64: 32066 ] OpenBSD > $ sudo vnconfig -u vnd0 > > > -Barry > > > > Here's the U-Boot output and dmesg, just for the fun of it: > > U-Boot SPL 2013.04-rc1-14237-g90639fe-dirty (Apr 13 2013 - 13:57:11) > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) > musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Peripheral mode controller at 47401000 using PIO, IRQ 0 > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) > musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Host mode controller at 47401800 using PIO, IRQ 0 > OMAP SD/MMC: 0 > mmc_send_cmd : timeout: No status update > reading u-boot.img > reading u-boot.img > > > U-Boot 2013.04-rc1-14237-g90639fe-dirty (Apr 13 2013 - 13:57:11) > > I2C: ready > DRAM: 512 MiB > WARNING: Caches not enabled > NAND: No NAND device found!!! > 0 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > *** Warning - readenv() failed, using default environment > > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) > musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Peripheral mode controller at 47401000 using PIO, IRQ 0 > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) > musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Host mode controller at 47401800 using PIO, IRQ 0 > Net: <ethaddr> not set. Validating first E-fuse MAC > Phy not found > PHY reset timed out > cpsw, usb_ether > Hit any key to stop autoboot: 0 > gpio: pin 53 (gpio 53) value is 1 > mmc0 is current device > micro SD card found > mmc0 is current device > gpio: pin 54 (gpio 54) value is 1 > SD/MMC found on device 0 > reading uEnv.txt > 151 bytes read in 3 ms (48.8 KiB/s) > Loaded environment from uEnv.txt > Importing environment from mmc ... > Running uenvcmd ... > reading bsd.umg > 3931284 bytes read in 453 ms (8.3 MiB/s) > ## Booting kernel from Legacy Image at 82800000 ... > Image Name: boot > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3931220 Bytes = 3.7 MiB > Load Address: 80300000 > Entry Point: 80300000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... > > > ^MOpenBSD/beagle booting ... > ^Marg0 0x0 arg1 0xe05 arg2 0x80000100 > ^Matag core flags 0 pagesize 0 rootdev 0 > ^Matag cmdline [sd0i:/bsd.umg] > ^Matag mem start 0x80000000 size 0x20000000 > ^Mbootfile: sd0i:/bsd.umg > ^Mbootargs: > ^Mmemory size derived from u-boot > ^Mbootconf.mem[0].address = 80000000 pages 131072/0x20000000 > ^MAllocating page tables > ^Mfreestart = 0x00729000, free_pages = 530647 (0x000818d7) > ^MIRQ stack: p0x81fd1000 v0xc1fd1000 > ^MABT stack: p0x81fd0000 v0xc1fd0000 > ^MUND stack: p0x81fcf000 v0xc1fcf000 > ^MSVC stack: p0x81fcd000 v0xc1fcd000 > ^MCreating L1 page table at 0x81ffc000 > ^MMapping kernel > ^MConstructing L2 page tables > ^Mundefined page pmap [ no symbol table formats found ] > ^Mboard type: beaglebone > ^MCopyright (c) 1982, 1986, 1989, 1991, 1993 > ^M The Regents of the University of California. All rights reserved. > ^MCopyright (c) 1995-2013 OpenBSD. All rights reserved. > http://www.OpenBSD.org > > ^MOpenBSD 5.4-beta (RAMDISK) #2: Thu Jul 18 18:25:17 EDT 2013 > ^M r...@pandaes.t.openbsd.org:/usr/src/sys/arch/beagle/compile/RAMDISK > ^Mreal mem = 536870912 (512MB) > ^Mavail mem = 518393856 (494MB) > ^Mmainbus0 at root > ^Mcpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core) > ^Mcpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled > ^Mcpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache > ^Momap0 at mainbus0: BeagleBone > ^Mprcm0 at omap0 rev 0.2 > > ^Msitaracm0 at omap0: control module, rev 1.0 > ^Mintc0 at omap0 rev 5.0 > ^Mdmtimer0 at omap0 rev 3.1 > ^Mdmtimer1 at omap0 rev 3.1 > ^Momdog0 at omap0 rev 0.1 > ^Mommmc0 at omap0 > ^Msdmmc0 at ommmc0 > ^Mcom0 at omap0: ti16750, 64 byte fifo > ^Mcom0: console > ^Mcpsw0 at omap0 txdescs at 0xcfb90000 rxdescs at 0xcfb91000, address > c8:a0:30:ae:dc:77 > ^Mukphy0 at cpsw0 phy 2: Generic IEEE 802.3u media interface, rev. 1: > OUI 0x0001f0, model 0x000f > ^Mscsibus0 at sdmmc0: 2 targets, initiator 0 > ^Msd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed > ^Msd0: 15271MB, 512 bytes/sector, 31275008 sectors > ^Mboot device: sd0 > ^Mroot on rd0a swap on rd0b dump on rd0b > ^MWARNING: CHECK AND RESET THE DATE! > ^Merase ^?, werase ^W, kill ^U, intr ^C, status ^T > > Welcome to the OpenBSD/beagle 5.4 installation program. > (I)nstall, (U)pgrade or (S)hell? s > # fdisk -e sd0^M > Enter 'help' for information > fdisk: 1> p > Disk: sd0 geometry: 1946/255/63 [31275008 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ------------------------------------------------------------------------------- > *0: 0C 0 1 1 - 1 254 63 [ 63: 32067 ] Win95 > FAT32L > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 3: A6 0 1 2 - 1 254 63 [ 64: 32066 ] OpenBSD > fdisk: 1> edit 3 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ------------------------------------------------------------------------------- > 3: A6 0 1 2 - 1 254 63 [ 64: 32066 ] OpenBSD > Partition id ('0' to disable) [0 - FF]: [A6] (? for help) > Do you wish to edit in CHS mode? [n] y > BIOS Starting cylinder [0 - 1945]: [0] 2 > BIOS Starting head [0 - 254]: [1] > BIOS Starting sector [1 - 63]: [2] > BIOS Ending cylinder [0 - 1945]: [1] 1945 > BIOS Ending head [0 - 254]: [254] > BIOS Ending sector [1 - 63]: [63] > fdisk:*1> p > Disk: sd0 geometry: 1946/255/63 [31275008 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ------------------------------------------------------------------------------- > *0: 0C 0 1 1 - 1 254 63 [ 63: 32067 ] Win95 > FAT32L > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 3: A6 2 1 2 - 1945 254 63 [ 32194: 31230296 ] OpenBSD > fdisk:*1> w > Writing MBR at offset 0. > fdisk: 1> q > # install^M
