Hi,
In case anyone is still interested in testing OpenBSD on the Linksys NSLU2
(IXP42x). Source is available at the bottom of the page at
http://lwazi.ca/openbsd/nslu2. The port is not complete - RTC, LED's, reset
and power button not yet supported. I have to login to shutdown. If you
know of another IXP42x port please let me know. I have pasted the dmesg at
the end. One more thing, you have to go hunting for the firmware or remove
NPE support.
Thanks,
Lwazi
OpenBSD 5.0 (NSLU2) #391: Sun Jan 1 13:45:56 MST 2012
lwazi@tbox:/usr/src/sys/arch/nslu2/compile/NSLU2
real mem = 33554432 (32MB)
avail mem = 27095040 (25MB)
mainbus0 at root
cpu0 at mainbus0: IXP425 266MHz rev 1 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache
ixpio0 at mainbus0
ixpip0 at ixpio0
ixpintc0 at ixpip0 addr 0xc8003000: Interrupt Controller
ixpost0 at ixpip0 addr 0xc8005000
ixpost0: IXP425 Interval Timer
com0 at ixpip0 addr 0xf0000000 intr 15: pxa2x0, 32 byte fifo
com0: console
ixme0 at ixpio0: IXP4xx MicroEngine Support
ixpnpe0 at ixme0 NPE-B
npe0 at ixpnpe0: Ethernet co-processor
npe0: remember to fix rx q setup
npe0: Ethernet address 55:44:33:22:11:00
rlphy0 at npe0 phy 1: RTL8201L 10/100 PHY, rev. 1
pci0 at ixpio0 bus 0
ohci0 at pci0 dev 1 function 0 "NEC USB" rev 0x43: INTA, version 1.0
ohci1 at pci0 dev 1 function 1 "NEC USB" rev 0x43: INTB, version 1.0
ehci0 at pci0 dev 1 function 2 "NEC USB" rev 0x04: INTC
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ixpnpe0: ixpnpe_intr: status 0x60000
/dev/ksyms: Symbol table not valid.
uhub3 at uhub0 port 2 "vendor 0x05e3 USB2.0 Hub" rev 2.00/77.61 addr 2
ural0 at uhub3 port 2 "Cisco-Linksys Wireless-G USB Network Adapter" rev
2.00/0.04 addr 3
ural0: MAC/BBP RT2571 (rev 0x05), RF RT2526, address 00:11:22:33:44:55
umass0 at uhub3 port 3 configuration 1 interface 0 "ITE TECH. INC. USB TO
IDE" rev 2.00/2.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <, FUJITSU MHK2120A, D834> SCSI0 0/direct
fixed serial.048d8903004911000391
sd0: 11513MB, 512 bytes/sector, 23579136 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: sd0
root on sd0a swap on sd0b dump on sd0b
WARNING: using filesystem date -- CHECK AND RESET THE DATE!
