I use BCM4345C5 from here
https://github.com/armbian/firmware/blob/master/brcm/BCM4345C5.hcd putting it
into the /usr/lib/firmware/brcm and after full shutdown it works. Reboot is not
sufficient. Sometimes it shows that it's on and cannot find any device, but so
is the wifi on Pinebook Pro, so you know, full shutdown and hope it works on
next boot.
---
Best regards, Alex
On Friday, August 9th, 2024 at 12:06, Andreas Reschke <[email protected]>
wrote:
> Hello,
>
> first: don't know if Bluetooth has worked before. If updated today the laptop
> and noticed Bluetooth isn't working.
>
> dmesg | grep -i bluetooth missed 'brcm/BCM4345C5.hcd
>
> After searching Internet I've found
> https://copr.fedorainfracloud.org/coprs/jwillikers/pinebook-pro and installed
> ap6256-firmware-2020.02-10.fc39.aarch64.rpm
>
> No failure on
>
> root@pinebook-pro:/home/andreas# dmesg | grep -i bluetooth
> [ 54.157295] Bluetooth: Core ver 2.22
> [ 54.168145] NET: Registered PF_BLUETOOTH protocol family
> [ 54.168154] Bluetooth: HCI device and connection manager initialized
> [ 54.168167] Bluetooth: HCI socket layer initialized
> [ 54.168173] Bluetooth: L2CAP socket layer initialized
> [ 54.168215] Bluetooth: SCO socket layer initialized
> [ 54.375968] Bluetooth: HCI UART driver ver 2.3
> [ 54.381603] Bluetooth: HCI UART protocol H4 registered
> [ 54.387230] Bluetooth: HCI UART protocol BCSP registered
> [ 54.418449] Bluetooth: HCI UART protocol LL registered
> [ 54.420446] Bluetooth: HCI UART protocol ATH3K registered
> [ 54.438694] Bluetooth: HCI UART protocol Three-wire (H5) registered
> [ 54.438939] Bluetooth: HCI UART protocol Intel registered
> [ 54.450367] Bluetooth: HCI UART protocol Broadcom registered
> [ 54.450978] Bluetooth: HCI UART protocol QCA registered
> [ 54.466370] Bluetooth: HCI UART protocol AG6XX registered
> [ 54.481649] Bluetooth: HCI UART protocol Marvell registered
> [ 54.871946] Bluetooth: hci0: BCM: chip id 130
> [ 54.878835] Bluetooth: hci0: BCM: features 0x0f
> [ 54.881103] Bluetooth: hci0: BCM4345C5
> [ 54.881119] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
> [ 54.915175] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.hcd' Patch
> [ 55.863677] Bluetooth: hci0: BCM: features 0x0f
> [ 55.889055] Bluetooth: hci0: BCM4345C5 Ampak_CL1.5 UART 37.4 MHz BT 5.0
> [Version: Version: 0033.0080]
> [ 55.889093] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0080
> [ 55.890379] Bluetooth: hci0: BCM: Using default device address
> (43:45:c5:00:1f:ac)
> [ 57.583111] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 57.587702] Bluetooth: BNEP filters: protocol multicast
> [ 57.592713] Bluetooth: BNEP socket layer initialized
>
> root@pinebook-pro:~# rfkill | grep blue
> 1 bluetooth hci0 unblocked unblocked
> root@pinebook-pro:~#
>
> Bluetooth doesn't find any controller.
>
> Greetings
>
> Andreas
--
_______________________________________________
arm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/[email protected]
Do not reply to spam, report it:
https://pagure.io/fedora-infrastructure/new_issue
