On Tue, Apr 3, 2018 at 5:02 AM, Richard Ryniker <[email protected]> wrote: > I used Fedora-Workstation-28-20180402.n.0.aarch64.raw.xz and can boot > successfully on my Raspberry Pi model 3B-plus. I used: > > fedora-arm-image-installer --target=rpi3 --media=/dev/sdi --norootpass > --resizefs --selinux=off > --image=fedora/F28/Fedora-Workstation-28-20180402.n.0.aarch64.raw.xz
Why disable SELinux, there should be no need to do that, is there a particular reason or "just because"? > to prepare a new SD card, but the root file system was not resized. I > had to do that manually. A dtb file for the 3-plus is already in this > image, there is no need to do anything about that. Correct, rc7 is now stable and it includes that file, there's been further updates and improvements that will be going out stable soon. > There was some hesitation early in the boot process. (Maybe fsck? Maybe > some First Boot procedure timing out, or perhaps some parameter-setting > activity - there was something that looked like a text menu but it > disappeared before I could read it.) It lasted around two minutes. When in the boot process? Was it the grub2 menu, that should be the only text menu you get with a Workstation install. > After boot, I logged on as root, created a user, enabled sshd, and can > now connect to the machine using ssh. > > Note that before I booted the system, I changed the default target from > graphical to multi-user, in order to avoid gnome-shell troubles: So why not just use the minimal image? > https://bugzilla.redhat.com/show_bug.cgi?id=1561184 > > I suspect the wired Ethernet port is not operational (I used a USB > Ethernet dongle for my ssh connection.) I have not tried any wi-fi > activity. I've had reports of this working fine, that said it should be much improved with the 4.16.0-300 or later kernel when that lands including stable MAC address. > There are problems, but a lot is working. Certainly enough to make > it reasonable to explore and learn what needs work. Well the support has just landed, I've also been traveling so not had the time to actually focus on it, we should have it to parity with the original RPi3 in time for GA freeze in a couple of weeks. _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected]
