On Mon, Mar 26, 2018 at 2:56 AM, Richard Ryniker <[email protected]> wrote: > Thank you, Peter Robinson, your instructions worked beautifully. > > Perhaps this will not work with the aarch64 version used by Tomáš Frolík, > but you already explained in an earlier post why there is little reason > to use that on a Raspberry Pi.
It should work in exactly the same way, the only difference on aarch64 is that the DT is in a broadcom sub directory. > I used the following to install on a SD card: > > fedora-arm-image-installer > --image=fedora/F28/Fedora-Workstation-armhfp-28-20180324.n.0-sda.raw.xz > --target=rpi3 --media=/dev/sde --norootpass --resizefs --selinux=off > > and copied the dtb file to bcm2837-rpi-3-b-plus.dtb as described, and > then successfully booted my Raspberry Pi 3B+. > > After completion of the first-boot dialog, things pretty much fell > apart. I saw the expected pointer on my screen, but the machine stuck > before it displayed the graphical login screen. There was no response to > my attempt to switch to another terminal with Ctrl-Alt-F4 or Alt-F4. > > I mounted my SD card on my regular Fedora workstation, then manually > changed the default target to multi-user.target. This worked much > better, I could log in and discover the RPi wired Ethernet is not > operational. > > Bypass this problem with a USB Ethernet dongle (which is automatically > configured without any problems), and I can run "dnf upgrade" which > mostly succeeds (there is a problem with libvirt-daemon, but that occurs > with the RPi 3B also.) > > Reboot, and I now have an (except for libvirt-daemon) up-to-date F28 on my > Raspberry Pi 3B+. > > No graphical login and no wired Ethernet are problems to be solved, but > at least there is a path to get a current F28 environment on the 3B+ for > those who want to work on this machine. > _______________________________________________ > arm mailing list -- [email protected] > To unsubscribe send an email to [email protected] _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected]
