Toerless Eckert <[email protected]> wrote:
    > Anyhow. let me just list what i think is necessary to fi up the GRASP so 
it works
    > for both TLS and IPinIP.

You seem to write TLS in a few places where TCP is actually called for.
To be more precise, it's static 1:1 destination NAT66, aka "port-forward"

    > e) Add at end of 4.1.1 suggested text:
       
    > The transport-proto of the locator-option indicates the mechanism(s)
    > supported by the proxy to the pledge. IPPROTO_TCP indicates the
    > mandatory ANI TLS circuit proxy. IPPROTO_IPV6 indicates the optional
    > IPinIP proxy, see Appendix C. IPPROTO_UDP would indicate a future
    > CoAP mechanism, see Section 4.2. For IPPROTO_IPV6, proto-number
    > MUST be 0.
      
    > The above example shows a proxy supporting both ANI TLS circuit proxy
    > and IP in IP proxy.

This would seem to be the only needed text to me.

    > b) Please consider improving the example as above for 4.1.1:
    > - lead in text for example
    > - example title
    > - [ [ objective, locator-option ] ] structure fix
    > - Ideally also include both TLS and IPinIP options in example

    > Also:
    > - I find the use of port 80 in the example highly confusing given how
    > the TCP connection MUST use TLS. Please change to AB80 (anything but
    > 80).

okay.

    > So, your full example locators with objectives would be:

    > [["AN_join_registrar", 4, 255], [O_IPv6_LOCATOR, fd45:1345::6789, 6,  
443]] ]
    > [["AN_join_registrar", 4, 255], [O_IPv6_LOCATOR, fd45:1345::6789, 17, 
5683] ]
    > [["AN_join_registrar", 4, 255], [O_IPv6_LOCATOR, fe80::1234, 41, 0] ]

    > Is this join registrar supporting ANI TLS proxy ?
    > Aka: i can't distinguish for the TCP locator whether it just indicates
    > a permitted TCP port for the IPinIP proxy or whether it indicates
    > the TCP port supported for IPinIP. And even if the proxy supports both,
    > its not clear to me that the TCP ports for "native" would be the same as
    > for IPinIP. Maybe its different code-paths == different ports.

I'm sorry, I don't even understand the problem.
Maybe someone else can translate for me.

-- 
]               Never tell me the odds!                 | ipv6 mesh networks [ 
]   Michael Richardson, Sandelman Software Works        | network architect  [ 
]     [email protected]  http://www.sandelman.ca/        |   ruby on rails    [ 
        

Attachment: signature.asc
Description: PGP signature

_______________________________________________
Anima mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/anima

Reply via email to