do you have terminal access to your board?
please provide your logcat output.
On 07/25/2012 09:14 AM, Duc Le wrote:
Hi all,
I tried to modified TI Android ICS for beagleboard XM to make it work with
devkit8000. But I got the following error:
*Freeing init memory:167*
*Warning: unable to open an initial console.*
*init: cannot open '/initlogo.rle'*
*init cannot find '/system/etc/install-recovery.sh', disabling
'flash-recovery'*
*init: using deprecated syntax for specifying property
'persist.sys.usb.config', use ${name} instead*
*init: using deprecated syntax for specifying property 'sys.usb.config',
use ${name} instead*
*init: using deprecated syntax for specifying property 'sys.usb.config' use
${name} instead*
*init: untracked pid 896 exited*
*init: untracked pid 894 exited*
*init: untracked pid 890 exited*
*init: untracked pid 931 exited*
*init: untracked pid 940 exited*
*init: untracked pid 941 exited*
*init: untracked pid 961 exited*
*init: untracked pid 971 exited*
*init: untracked pid 966 exited*
*init: untracked pid 968 exited*
*init: untracked pid 980 exited*
*init: untracked pid 989 exited*
*init: untracked pid 991 exited*
*init: critical process 'servicemanager' exited 4 times in 4 minnutes;
reboot into recovery mode*
*Sysq: Emergency Remount R/O*
*Restarting system with command 'recovery'*
Could someone help me out? I checked the Binder IPC driver, and tried to
minimize the init.rc but it could not fix the error. My bootargs is :
*setenv bootargs 'console=ttyS2,115200n8 androidboot.console=ttyS2 mem=256M
root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=6 init=/init ip=off
omap_vout.vid1_static_vrfb_alloc=y omapfb.mode=lcd:800x480
omapdss.def_disp=lcd vram=8M omapfb.vram=0:8M debug'*
Thank you very much for any of your help.
Best Regards,
Duc Le
On Sunday, April 15, 2012 2:22:00 AM UTC+8, khasim wrote:
Hi all,
Please find TI Android ICS DevKit release for Beagleboard XM and
Beaglebone platforms here,
http://www.ti.com/sitara-android <http://www.ti.com/sitara-android>
Beaglebone:
http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_ICS_4_0_3_DevKit_3_0_1/index_FDS.html
<http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_ICS_4_0_3_DevKit_3_0_1/index_FDS.html>
Beaglebone LCD and DVID cape support is now added.
Beagleboard XM:
http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_ICS_4_0_3_DevKit_3_0_0/index_FDS.html
<http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_ICS_4_0_3_DevKit_3_0_0/index_FDS.html>
Thanks to arowboat, android-porting and Linaro community for helping us.
Regards,
Khasim
https://www.facebook.com/arowboat.org
<https://www.facebook.com/arowboat.org>
--
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
--
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
