Hi Sai Chaitanya Chitneedi, can you check it my issues.... is it my thinking was correct ot not !!!!!
On Thu, Jan 19, 2012 at 1:18 PM, Sai Chaitanya Chitneedi < [email protected]> wrote: > Sorry i forgot to attach. The attachment here. > > > On Thu, Jan 19, 2012 at 1:17 PM, Sai Chaitanya Chitneedi < > [email protected]> wrote: > >> Hi Devindrappa, >> The log shows none of the scripts are working. correctly. The log is >> continued and i can't make out which error is for which script. Could you >> please empty the log everytime before running a a script. That way i will >> know which error is for which script. >> In the attached log i seprated them. >> >> 1. The first set is from the old log only. >> 2. In the second set, it is still expecting AT as response. I don't >> know which script is giving this. >> 3. The 3rd,4th,5th,6th sets almost got it right. They are SENDING >> AT^M and expecting OK as result but since it is sending wrong message, it >> will not get ok. WORK ON THE SCRIPT GIVING THIS RESULT. give >> AT/c instead of just AT and retry. >> 4. The next few sets are failing because they are expecting /rAT as a >> response from modem. the script giving this error needs to be modified to >> have a space between /r and AT. it should be /r AT not /rAT >> 5. The next few sets have a syntax mistake. Try to put a missing ' >> [OR] " for the script giving this error. >> 6. The last 3 sets are again expecting /rAT as a response from >> modem. Do as i said in step 4. >> >> So basically all scripts are still wrong. That is why we are still >> getting same error. Could you please separate which error is for which >> script. Tell me which script is giving the error i said in step 3. We have >> a improvement but still we didn't get it correctly. >> >> >> On Thu, Jan 19, 2012 at 12:54 PM, venkat k raju <[email protected]>wrote: >> >>> Hi Sai, >>> >>> i think some problem with software reset issues!!!!!! android >>> application or reference-ril.so i don't know... >>> please check this log message. reset means the application will send >>> AT+CFUN something like this right.. that time my modem was get resetting >>> >>> then usb was disconnecting ... >>> >>> AT> ATE0Q0V1 >>> D/RILB ( 165): Notifying: radio available >>> D/RILJ ( 165): [0002]> SCREEN_STATE: true >>> D/RILJ ( 165): [0003]> RADIO_POWER >>> D/AT ( 66): atchannel: EOF reached >>> I/RIL ( 66): AT channel closed >>> D/RILJ ( 165): [UNSL]< UNSOL_RESPONSE_RADIO_STATE_CHANGED RADIO_OFF >>> E/RILJ ( 165): ERROR: mReqPending is NOT 0 but1 at TIMEOUT, reset! >>> D/RIL ( 66): onRequest: SCREEN_STATE >>> D/RILJ ( 165): [0002]< SCREEN_STATE error: >>> com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE >>> E/GSM ( 165): Wrong network type: 0 >>> E/GSM ( 165): Wrong network type: 0 >>> D/GSM ( 165): Poll ServiceState done: oldSS=[1 home null null >>> null Unknown CSS not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: >>> false] newSS=[3 home nulln >>> E/RILJ ( 165): ERROR: mReqPending is NOT 0 but1 at TIMEOUT, reset! >>> D/RILJ ( 165): [0004]> BASEBAND_VERSION >>> D/RIL ( 66): onRequest: RADIO_POWER >>> D/RILJ ( 165): [0003]< RADIO_POWER error: >>> com.android.internal.telephony.CommandException: GENERIC_FAILURE >>> D/RILJ ( 165): [0005]> GET_IMEI >>> E/RILJ ( 165): ERROR: mReqPending is NOT 0 but2 at TIMEOUT, reset! >>> D/RILJ ( 165): [0006]> GET_IMEISV >>> D/RIL ( 66): onRequest: BASEBAND_VERSION >>> D/RIL ( 66): onRequest: GET_IMEI >>> D/RILJ ( 165): [0004]< BASEBAND_VERSION error: >>> com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE >>> D/RILJ ( 165): [0005]< GET_IMEI error: >>> com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE >>> E/RILJ ( 165): ERROR: mReqPending is NOT 0 but1 at TIMEOUT, reset! >>> D/RIL ( 66): onRequest: GET_IMEISV >>> D/RILJ ( 165): [0006]< GET_IMEISV error: >>> com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE >>> I/RIL ( 66): Re-opening after close >>> D/RILB ( 165): Notifying: radio not available >>> D/RILJ ( 165): [UNSL]< UNSOL_RESPONSE_RADIO_STATE_CHANGED >>> RADIO_UNAVAILABLE >>> E/GSM ( 165): Wrong network type: 0 >>> E/GSM ( 165): Wrong network type: 0 >>> D/GSM ( 165): Poll ServiceState done: oldSS=[3 home null null >>> null Unknown CSS not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: >>> false] newSS=[1 home nulln >>> D/RILJ ( 165): [0007]> GET_CURRENT_CALLS >>> E/RILJ ( 165): ERROR: mReqPending is NOT 0 but1 at TIMEOUT, reset! >>> D/RIL ( 66): onRequest: GET_CURRENT_CALLS >>> D/RILJ ( 165): [0007]< GET_CURRENT_CALLS error: >>> com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE >>> >>> is reset necessary and how to denied it please suggest me. what i am >>> thinking is wrong or what? >>> >>> >>> On Thu, Jan 19, 2012 at 12:15 PM, Devindrappa Handraki < >>> [email protected]> wrote: >>> >>>> Hi Chaitanya, >>>> >>>> Thanks for your reply, please look at the attached ppp.log and suggest >>>> me where i am wrong. >>>> >>>> Thanks and Regards, >>>> Devindrappa >>>> >>>> >>>> On Wed, Jan 18, 2012 at 10:57 PM, Sai Chaitanya Chitneedi < >>>> [email protected]> wrote: >>>> >>>>> Hi Devindrappa, >>>>> >>>>> 1. Please send new ppp-log and go through my previous message. >>>>> 2. I was right about the REQUEST_GET_PREFERRED_NETWORK_TYPE it >>>>> is for 2G/3G only.I checked my huawei ril , i have this in it:- >>>>> >>>>> >>>>> switch (request){ >>>>> >>>>> case RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE: >>>>> requestSetPreferredNetworkType(data, datalen, t); >>>>> break; >>>>> >>>>> >>>>> and for the function " requestSetPreferredNetworkType " i'm giving at >>>>> commands at+bandset=0 and AT+CGAATT=2,1,1 which will set my haweui E1732 >>>>> for gsm only =2,1,2 for 3G only and 2,1,0 for dual mode. You can see in >>>>> this forum here >>>>> forum.xda-developers.com/archive/index.php/t-711753.html . Search for >>>>> my said commands and you will find details. >>>>> >>>>> 3. . So obviously you don't have to deal with this. But if you still >>>>> want to loose the error continue reading. Maybe the cause for error was >>>>> your that your RIL didnot define how to handle the request itself. So it >>>>> is >>>>> giving error that request can't be supported by this ril. Look for the >>>>> function "static void onRequest (int request, void *data, size_t datalen, >>>>> RIL_Token t)" it will have a switch case statement with "request" as >>>>> switch. In that give a case statement as i mentioned above at start of >>>>> this >>>>> message, but don't mention any function to call.leave it blank. That's it >>>>> your error should vanish. >>>>> >>>>> 4. If you are keen on working with data connection in RIL. The best >>>>> the ril can do for you is give the initialization commands. It cannot >>>>> setup >>>>> the connection, just sends at commands. look for function >>>>> "requestSetupDataCall" this will have the initialization commands to be >>>>> sent to modem before pppd link. This is the best the ril can do for you >>>>> with respect to a data connection. It canNOT setup a data link. You will >>>>> have to call pppd for that. The reason we are not using this yet, is bcoz >>>>> we can't edit it frequently like the chat script and we didn't figure out >>>>> the correct initialization commands yet and it does the exact same thing >>>>> the chat script does for us. If the chat scripts fails this will fail as >>>>> well. once we have a working connection we can comeback to the RIL. As i >>>>> said ril has very little influence, if not none, in establishing a data >>>>> connection. So 1st get data connection, then debug ril coz ril will not >>>>> help in data connection in anyway. we can get data connection without ril. >>>>> So just concentrate on the pppd logs for the moment. Ignore RIL. >>>>> >>>>> 5. And as for the c program to send at commands. Good idea by venkat. >>>>> but you can also do it by cross compiling "echo" if you don't already have >>>>> it for ARM. Then you can send any at command by giving command "echo >>>>> atd*99***1# > /dev/ttyS0". You can also use "write" instead. May be cat >>>>> will also work but i never tried it. >>>>> >>>>> >>>>> On Wed, Jan 18, 2012 at 9:05 PM, Sai Chaitanya Chitneedi < >>>>> [email protected]> wrote: >>>>> > >>>>> > Hi Devindrappa, >>>>> > 1.Could you please post new ppp-log. It would have changed for sure. >>>>> > 2.As venkat suggests remove rild startup from init.rc and re run and >>>>> see what happens. Comment out the rild service. >>>>> > 3.I will look into the error but ril has very little influence, if >>>>> not none, in establishing a data connection. The ril is doing everything >>>>> it >>>>> is supposed to do. It is for telephony services only. >>>>> > 4.I'm not sure but i think "the preffered network type" has to do >>>>> with a AT command which sets whether to look for a 2G or 3G network first >>>>> {or} the network scan order to register in the specific network. It sets >>>>> its order to scan for networks. It is for 3G modems. I had experience with >>>>> it when i was working with a huawei modem. It may not apply in your case >>>>> because your modem doesn't support 3G and hence it's AT command is >>>>> not accepted. I will look into it and get back to you with confirm answer. >>>>> > 5.IF you think it is a sim lock for the time being you can simply >>>>> replace the sim and go ahead. A lock is sim specific. A modem won't report >>>>> a lock unless sim states so. >>>>> > >>>>> > On Wed, Jan 18, 2012 at 8:27 PM, Devindrappa Handraki < >>>>> [email protected]> wrote: >>>>> >> >>>>> >> Hi Chaitanya, >>>>> >> >>>>> >> 1. I tried with all your script but getting same error : >>>>> >> I/pppd ( 1394): ######## Starting pppd >>>>> >> I/pppd ( 1396): ######## pppd additional arguments >>>>> >> E/pppd ( 1397): Connect script failed >>>>> >> I/pppd ( 1400): ######### pppd exited with 0 >>>>> >> >>>>> >> 2. When i do logcat -b radio >>>>> >> on logcat -b radio, i see following log message >>>>> >> [0081]< REQUEST_GET_PREFERRED_NETWORK_TYPE error: >>>>> com.android.internal.telephony.CommandException: REQUEST_NOT_SUPPORTED >>>>> >> What do meant by this error. >>>>> >> >>>>> >> 3. Please advice, if the RIL i have ported is minimal for Phone and >>>>> SMS only and need to be supported for Network as well, as the radio log >>>>> message dumps as >>>>> >> [0081]< REQUEST_GET_PREFERRED_NETWORK_TYPE error: >>>>> com.android.internal.telephony.CommandException: REQUEST_NOT_SUPPORTED >>>>> >> >>>>> >> Do i need to implemenet in RIL 'GET_PREFERRED_NETWORK_TYPE' and >>>>> 'SET_PREFERRED_NETWORK_TYPE'? or am i missing anything else as well, as i >>>>> see in setttings->security settings, my SIM LOCK is enabled by default, do >>>>> i have to unlock it? if so,it asks for a PIN as well. >>>>> >> >>>>> >> Thanks and Regards, >>>>> >> Devindrappa >>>>> >> >>>>> >> >>>>> >> >>>>> >> On Wed, Jan 18, 2012 at 5:24 PM, Sai Chaitanya Chitneedi < >>>>> [email protected]> wrote: >>>>> >>> >>>>> >>> Hi venkat, >>>>> >>> for running from init.rc simply put your command in a script and >>>>> add the script as a service. You can follow instructions here :- >>>>> http://afewe.wordpress.com/android-arm-development/use-point-to-point-protocol-ppp-in-android/ >>>>> Just modify the non commented /system/bin/pppd /dev/ttyUSB0 115200 >>>>> mo...... >>>>> line with your command and add this in your init.rc file >>>>> >>> >>>>> >>> service pppd_gprs /etc/ppp/init.gprs-pppd >>>>> >>> user root >>>>> >>> group radio cache inet misc >>>>> >>> >>>>> >>> >>>>> >>> If you run pppd and rild together what error are you getting? if >>>>> your modem is getting disconnected then i may not be able to help bcoz i >>>>> don't have the same modem. But if the problem is that you are getting >>>>> above >>>>> error log then the problem is that after at+cgdcont=1... your modem is not >>>>> giving OK response it is giving new line characters and timing out. Did >>>>> you >>>>> want it to send a newline character after "CellOne" ~ ^M. if not, then >>>>> that >>>>> may be the culprit. Or may be your modem is not able to complete the >>>>> request before the timeout. >>>>> >>> >>>>> >>> On Wed, Jan 18, 2012 at 4:15 PM, venkat k raju < >>>>> [email protected]> wrote: >>>>> >>>> >>>>> >>>> Hi this was my command and response!!!!!!!! >>>>> >>>> >>>>> >>>> >>>>> >>>> #/system/bin/pppd nodetach debug /dev/ttyACM0 115200 nocrtscts >>>>> local 0.0.0.0:10.0.0.1 noipdefault ipcp-accept-local connect >>>>> '/system/bin/chat -v -s -f /system/etc/p >>>>> >>>> >>>>> >>>> pp/gprs_chat' defaultroute usepeerdns modem updetach noauth >>>>> >>>> >>>>> >>>> timeout set to 15 seconds >>>>> >>>> abort on (BUSY) >>>>> >>>> abort on (NO CARRIER) >>>>> >>>> abort on (VOICE) >>>>> >>>> abort on (NO DIALTONE) >>>>> >>>> abort on (NO DIAL TONE) >>>>> >>>> abort on (NO ANSWER) >>>>> >>>> abort on (DELAYED) >>>>> >>>> report (CONNECT) >>>>> >>>> timeout set to 40 seconds >>>>> >>>> send (AT+CGDCONT=1,"IP","CellOne"^M) >>>>> >>>> expect (OK) >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> ^M^M^M >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> ^M >>>>> >>>> alarm >>>>> >>>> Failed >>>>> >>>> >>>>> >>>> here my files permissions >>>>> >>>> ls -l /dev/ttyACM0 >>>>> >>>> crw-rw---- radio radio 166, 0 2000-01-02 12:39 ttyACM0 >>>>> >>>> >>>>> >>>> ls -l /system/bin/pppd >>>>> >>>> -rwxrwxr-x radio radio 139540 2012-01-16 08:11 pppd >>>>> >>>> >>>>> >>>> >>>>> >>>> ls -l /system/bin/chat >>>>> >>>> -rwxr-xr-x radio radio 42752 2012-01-16 09:39 chat >>>>> >>>> >>>>> >>>> ls -l /system/etc/ppp/gprs_chat >>>>> >>>> -rwxr-xr-x radio radio 229 2012-01-18 10:27 gprs_chat >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> On Wed, Jan 18, 2012 at 4:08 PM, venkat k raju < >>>>> [email protected]> wrote: >>>>> >>>>> >>>>> >>>>> Hi chaitanya, >>>>> >>>>> >>>>> >>>>> can you tell me how to run pppd from init.rc file. >>>>> >>>>> >>>>> >>>>> one more thing here is if i run rild daemon,then pppd getting >>>>> failed. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Tue, Jan 17, 2012 at 2:35 PM, venkat k raju < >>>>> [email protected]> wrote: >>>>> >>>>>> >>>>> >>>>>> sorry without rild interface i am connecting internet >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> On Tue, Jan 17, 2012 at 2:35 PM, venkat k raju < >>>>> [email protected]> wrote: >>>>> >>>>>>> >>>>> >>>>>>> Hi Devindrappa Handraki, >>>>> >>>>>>> >>>>> >>>>>>> i had been trying it........... for me both are not working at >>>>> time... here i am using mux concept also.. !!!!!!!! >>>>> >>>>>>> >>>>> >>>>>>> i don't know what happen in your case....but with rild >>>>> interface i have been connection the net .. >>>>> >>>>>>> see once again... >>>>> >>>>>>> 1) i written code for manually enter at commands!!!!! >>>>> >>>>>>> in this #AT+CGREG=1 >>>>> >>>>>>> #AT^SGAUTH=0 // in your case no need of this command. >>>>> >>>>>>> #At+cgatt=1 >>>>> >>>>>>> # AT+Cgdcont=1,IP,BSNLNET >>>>> >>>>>>> 2) >>>>> >>>>>>> >>>>> >>>>>>> /system/bin/pppd nodetach debug /dev/ttyACM0 115200 >>>>> nocrtscts local 0.0.0.0:10.0.0.1 noipdefault ipcp-accept-local >>>>> connect '/system/bin/chat -v -s -f /system/etc/ppp/gprs_chat' defaultroute >>>>> usepeerdns modem updetach noauth >>>>> >>>>>>> >>>>> >>>>>>> 3) gprs_chat.sh file contains >>>>> >>>>>>> >>>>> >>>>>>> ABORT 'BUSY' >>>>> >>>>>>> ABORT 'NO CARRIER' >>>>> >>>>>>> ABORT 'VOICE' >>>>> >>>>>>> ABORT 'NO DIALTONE' >>>>> >>>>>>> ABORT 'NO DIAL TONE' >>>>> >>>>>>> ABORT 'NO ANSWER' >>>>> >>>>>>> ABORT 'DELAYED' >>>>> >>>>>>> REPORT CONNECT >>>>> >>>>>>> TIMEOUT 6 >>>>> >>>>>>> '' >>>>> >>>>>>> 'AT+CGDCONT=1,"IP","airtelgprs.com"' >>>>> >>>>>>> 'OK' 'ATD*99***1#' >>>>> >>>>>>> TIMEOUT 30 >>>>> >>>>>>> CONNECT '' >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> On Tue, Jan 17, 2012 at 2:23 PM, Devindrappa Handraki < >>>>> [email protected]> wrote: >>>>> >>>>>>>> >>>>> >>>>>>>> Hi venkat and Chaitanya, >>>>> >>>>>>>> >>>>> >>>>>>>> 1. I am not able to access Internet, i am getting the below >>>>> mentioned error >>>>> >>>>>>>> E/pppd ( 1799): Connect script failed >>>>> >>>>>>>> I/pppd ( 1802): ######### pppd exited with 8 >>>>> >>>>>>>> >>>>> >>>>>>>> 2. Do we need to configure mux driver for internet access and >>>>> telephone services. If so please give me some hints. >>>>> >>>>>>>> >>>>> >>>>>>>> Thanks and Regards, >>>>> >>>>>>>> Devindrappa >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> On Tue, Jan 17, 2012 at 9:12 AM, venkat k raju < >>>>> [email protected]> wrote: >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> Hi Chaitanya & Devindrappa, >>>>> >>>>>>>>> >>>>> >>>>>>>>> thanks for your suggestions. >>>>> >>>>>>>>> >>>>> >>>>>>>>> finally i am able to establish GPRS and GSM individually. >>>>> >>>>>>>>> if i tried both at time then my usb (modem) was >>>>> disconnecting. >>>>> >>>>>>>>> >>>>> >>>>>>>>> i have been trying it... !!!!!!!!! >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> On Mon, Jan 16, 2012 at 5:23 PM, Sai Chaitanya Chitneedi < >>>>> [email protected]> wrote: >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> Hi venkat, >>>>> >>>>>>>>>> I'm not aware of the mux driver and config binary you are >>>>> using. Assuming it works well, it seems like a permission problem or a >>>>> locked socket problem. do a "lsof" on /dev/socket/rild (socket used by >>>>> android to communicate with ril daemon) for any exsting locks and check >>>>> its >>>>> permissions. Try with the physical port first,after killing the rild. Then >>>>> try with your virtual port. >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> Also if it suits your purpose use a soft link instead of >>>>> virtual ports. >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> On Mon, Jan 16, 2012 at 11:25 AM, venkat k raju < >>>>> [email protected]> wrote: >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> Hi chaitanya, >>>>> >>>>>>>>>>> can you explain me how to establish gsm on gingerbread. >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> i am following there steps to manually establish GSM/GPRS >>>>> .... please correct me. >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> #chmod 0666 /dev/ttyACM0 /********* my physical serial >>>>> port*******/ >>>>> >>>>>>>>>>> # chown radio.radio /dev/ttyACM0 >>>>> >>>>>>>>>>> # insmod ./linmux.ko /*************** my mux driver to >>>>> create virtual port *********/ >>>>> >>>>>>>>>>> # chmod 0666 /dev/ttyMux1 >>>>> >>>>>>>>>>> # chmod 0666 /dev/ttyMux2 >>>>> >>>>>>>>>>> # chmod 0666 /dev/ttyMux0 >>>>> >>>>>>>>>>> # chown radio.radio /dev/ttyMux0 >>>>> >>>>>>>>>>> # chown radio.radio /dev/ttyMux1 >>>>> >>>>>>>>>>> # chown radio.radio /dev/ttyMux2 >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> #mknod /dev/muxcfg c 239 0 /****** i am creating the >>>>> interface driver***********/ >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> #/system/bin/linmuxcfg -p=/dev/ttyACM0 /******** >>>>> configuring the physical port to virtual port **********/ >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> then i am trying to kill rild daemon then i am trying >>>>> execute the bellow command for GSM as well as gprs with new virtual serial >>>>> port. >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> #/system/bin/rild -l /system/lib/libreference-ril.so -- -d >>>>> /dev/ttyMux0 >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> but here i got the error like this >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> I/RIL ( 360): Opening tty device /dev/ttyMux0 >>>>> >>>>>>>>>>> E/RILC ( 360): Failed to get socket 'rild' >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> please suggest me !!!!!!! >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> thanks&Regards >>>>> >>>>>>>>>>> k.v.raju >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> -- >>>>> >>>>>>>>> thanks&Regards >>>>> >>>>>>>>> k.v.raju >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> -- >>>>> >>>>>>> thanks&Regards >>>>> >>>>>>> k.v.raju >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> -- >>>>> >>>>>> thanks&Regards >>>>> >>>>>> k.v.raju >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> thanks&Regards >>>>> >>>>> k.v.raju >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> -- >>>>> >>>> thanks&Regards >>>>> >>>> k.v.raju >>>>> >>> >>>>> >>> >>>>> >> >>>>> > >>>>> >>>> >>>> >>> >>> >>> -- >>> thanks&Regards >>> k.v.raju >>> >> >> > -- thanks&Regards k.v.raju -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
