Hello, everybody. I installed the android and linux kernel which Beagle Board released in my OMAP3530 device, I have modified the omap3_android_beagle_defconfig to enter the kernel on my device,
The clock is correct, and so do the xres and yres. omapfb: Pixclock 72000 kHz hfreq 43.3 kHz vfreq 58.1 Hz I/EGLDisplaySurface( 704): using (fd=21) I/EGLDisplaySurface( 704): id = omapfb I/EGLDisplaySurface( 704): xres = 1280 px I/EGLDisplaySurface( 704): yres = 720 px I/EGLDisplaySurface( 704): xres_virtual = 1280 px I/EGLDisplaySurface( 704): yres_virtual = 1440 px I/EGLDisplaySurface( 704): bpp = 16 I/EGLDisplaySurface( 704): r = 11:5 I/EGLDisplaySurface( 704): g = 5:6 I/EGLDisplaySurface( 704): b = 0:5 I/EGLDisplaySurface( 704): width = 51 mm (637.490173 dpi) I/EGLDisplaySurface( 704): height = 38 mm (481.263153 dpi) I/EGLDisplaySurface( 704): refresh rate = 60.03 Hz It is scuessful to enter the kernel. However, the display didn't show anything. The following link is my debug message: http://pastebin.com/m6e0e3db9 I use oscilloscope to measure the signal, the clock is 72000 khz, but there is no any data sent!!! Why the CPU doesn't send any vedio data??? Is it possible that the android system error? Such as it didn't enter the UI?? Please notify me if you have any advise, and I would appreciate you very much !!! Best Regards -- Michael
-- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
