if (!(tmp & flag)) condition will always evaluate to true
when the flag is 0x0 (AMDGPU_RLCG_GC_WRITE). Instead check
that address bits are cleared to determine whether
the command is complete.
Signed-off-by: Victor Skvortsov <victor.skvort...@amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index e1288901beb6..a8babe3bccb8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -902,7 +902,7 @@ static u32 amdgpu_virt_rlcg_reg_rw(struct amdgpu_device
*adev, u32 offset, u32 v
for (i = 0; i < timeout; i++) {
tmp = readl(scratch_reg1);
- if (!(tmp & flag))
+ if (!(tmp & AMDGPU_RLCG_SCRATCH1_ADDRESS_MASK))
break;
udelay(10);
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index 40803aab136f..68f592f0e992 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -43,6 +43,8 @@
#define AMDGPU_RLCG_WRONG_OPERATION_TYPE 0x2000000
#define AMDGPU_RLCG_REG_NOT_IN_RANGE 0x1000000
+#define AMDGPU_RLCG_SCRATCH1_ADDRESS_MASK 0xFFFFF
+
/* all asic after AI use this offset */
#define mmRCC_IOV_FUNC_IDENTIFIER 0xDE5
/* tonga/fiji use this offset */
--
2.25.1
