From: Wesley Chalmers <wesley.chalm...@amd.com>
[WHY]
SCR for DP 2.0 Spec states that a DPTX shall put LTTPRs into Transparent
mode after reading LTTPR Capability registers on HPD.
The wording of the SCR is somewhat ambiguous as to whether
Transparent mode must be set explicity, or is implicitly set on LTTPR
capability read. Explicitly setting Transparent mode after LTTPR
capability read should cover all
cases.
Signed-off-by: Wesley Chalmers <wesley.chalm...@amd.com>
Reviewed-by: Jun Lei <jun....@amd.com>
Acked-by: Anson Jacob <anson.ja...@amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 38fabaff51ea..586f05a6cd77 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -3705,9 +3705,10 @@ bool dp_retrieve_lttpr_cap(struct dc_link *link)
link->dpcd_caps.lttpr_caps.max_lane_count > 0 &&
link->dpcd_caps.lttpr_caps.max_lane_count <= 4
&&
link->dpcd_caps.lttpr_caps.revision.raw >=
0x14);
- if (is_lttpr_present)
+ if (is_lttpr_present) {
CONN_DATA_DETECT(link, lttpr_dpcd_data,
sizeof(lttpr_dpcd_data), "LTTPR Caps: ");
- else
+ configure_lttpr_mode_transparent(link);
+ } else
link->lttpr_mode = LTTPR_MODE_NON_LTTPR;
}
return is_lttpr_present;
--
2.25.1
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
