Am 03.03.20 um 17:07 schrieb He, Jacob:

[AMD Official Use Only - Internal Distribution Only]


Oh, you are right! If SPM_VMID is updated by other process while the SPM enabled commands is executing, that will cause VM fault.

Is the wait vm idle right before unreserve vmid still necessary if using asynchroneously setting SPM_VMID?


No, that are alternative approaches.

Updating the VMID asynchronously sounds a bit cleaner to me, but feel free to pick whatever is easier for you to implement.

Regards,
Christian.

Thanks

Jacob

*From: *Koenig, Christian <mailto:christian.koe...@amd.com>
*Sent: *Tuesday, March 3, 2020 11:36 PM
*To: *He, Jacob <mailto:jacob...@amd.com>; amd-gfx@lists.freedesktop.org <mailto:amd-gfx@lists.freedesktop.org> *Subject: *Re: [PATCH] drm/amdgpu: Update SPM_VMID with the job's vmid when application reserves the vmid

See the SPM buffer address is set using CP commands as well, right? And those execute asynchronously.

When we now synchronously update the SPM VMID we risk that we switch from one process to another while the new process is not ready yet with its setup.

That could have quite a bunch of unforeseen consequences, including accidentally writing SPM data into the new process address space at whatever buffer address was used before.

This is something we at least should try to avoid.

Regards,
Christian.

Am 03.03.20 um 16:28 schrieb He, Jacob:

    [AMD Official Use Only - Internal Distribution Only]

    Thanks!  Could you please take an example of trouble  “This way we
    avoid a bunch of trouble when one process drops the VMID
    reservation and another one grabs it.”?

    Thanks

    Jacob

    *From: *Koenig, Christian <mailto:christian.koe...@amd.com>
    *Sent: *Tuesday, March 3, 2020 11:03 PM
    *To: *He, Jacob <mailto:jacob...@amd.com>;
    amd-gfx@lists.freedesktop.org <mailto:amd-gfx@lists.freedesktop.org>
    *Subject: *Re: [PATCH] drm/amdgpu: Update SPM_VMID with the job's
    vmid when application reserves the vmid

    Am 03.03.20 um 15:34 schrieb He, Jacob:

        [AMD Official Use Only - Internal Distribution Only]

        /It would be better if we could do that asynchronously with a
        register
        write on the ring./

        Sorry, I don’t get your point. Could you please elaborate more?


    You pass the ring from amdgpu_vm_flush() to the
    *_update_spm_vmid() functions.

    And then instead of using WREG32() you call
    amdgpu_ring_emit_wreg() to make the write asynchronously on the
    ring buffer using a CP command.

    This way we avoid a bunch of trouble when one process drops the
    VMID reservation and another one grabs it.

    Regards,
    Christian.



        Thanks

        Jacob

        *From: *Christian König <mailto:ckoenig.leichtzumer...@gmail.com>
        *Sent: *Tuesday, March 3, 2020 10:16 PM
        *To: *He, Jacob <mailto:jacob...@amd.com>;
        amd-gfx@lists.freedesktop.org
        <mailto:amd-gfx@lists.freedesktop.org>
        *Subject: *Re: [PATCH] drm/amdgpu: Update SPM_VMID with the
        job's vmid when application reserves the vmid

        Am 02.03.20 um 06:35 schrieb Jacob He:
        > SPM access the video memory according to SPM_VMID. It should
        be updated
        > with the job's vmid right before the job is scheduled.
        SPM_VMID is a
        > global resource
        >
        > Change-Id: Id3881908960398f87e7c95026a54ff83ff826700
        > Signed-off-by: Jacob He <jacob...@amd.com>
        <mailto:jacob...@amd.com>
        > ---
        >   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 4 ++++
        >   1 file changed, 4 insertions(+)
        >
        > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
        b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
        > index c00696f3017e..c761d3a0b6e8 100644
        > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
        > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
        > @@ -1080,8 +1080,12 @@ int amdgpu_vm_flush(struct
        amdgpu_ring *ring, struct amdgpu_job *job,
        >        struct dma_fence *fence = NULL;
        >        bool pasid_mapping_needed = false;
        >        unsigned patch_offset = 0;
        > +     bool update_spm_vmid_needed = (job->vm &&
        (job->vm->reserved_vmid[vmhub] != NULL));
        >        int r;
        >
        > +     if (update_spm_vmid_needed &&
        adev->gfx.rlc.funcs->update_spm_vmid)
        > + adev->gfx.rlc.funcs->update_spm_vmid(adev, job->vmid);
        > +

        It would be better if we could do that asynchronously with a
        register
        write on the ring.

        The alternative is that we block for the VM to be idle in
        amdgpu_vm_ioctl() before unreserving the VMID.

        In other words lock the reservation object of the root PD and
        call
        amdgpu_vm_wait_idle() before calling amdgpu_vmid_free_reserved().

        Regards,
        Christian.

        >        if (amdgpu_vmid_had_gpu_reset(adev, id)) {
        >                gds_switch_needed = true;
        >                vm_flush_needed = true;


_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Reply via email to