On 2024-12-09 22:53, jesse.zh...@amd.com wrote:
sdmv7 queue reset already supports by mmio, add its sys file.

Signed-off-by: Jesse Zhang<jesse.zh...@amd.com>
---
  drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c | 8 +++++++-
  1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c 
b/drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c
index 627e0173b64d..8e69b84e0165 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c
@@ -1368,6 +1368,9 @@ static int sdma_v7_0_sw_init(struct amdgpu_ip_block 
*ip_block)
                        return r;
        }
+ adev->sdma.supported_reset =
+               amdgpu_get_soft_full_reset_mask(&adev->sdma.instance[0].ring);
+       adev->sdma.supported_reset |= AMDGPU_RESET_TYPE_PER_QUEUE;
        /* Allocate memory for SDMA IP Dump buffer */
        ptr = kcalloc(adev->sdma.num_instances * reg_count, sizeof(uint32_t), 
GFP_KERNEL);
        if (ptr)
@@ -1378,7 +1381,9 @@ static int sdma_v7_0_sw_init(struct amdgpu_ip_block 
*ip_block)
  #ifdef CONFIG_DRM_AMDGPU_NAVI3X_USERQ
        adev->userq_funcs[AMDGPU_HW_IP_DMA] = &userq_mes_funcs;
  #endif
-
+       r = amdgpu_sdma_sysfs_reset_mask_init(adev);
+       if (r)
+               return r;
return r;

4 lines above - should it be one line only? I hope the compiler can optimize the code to be same as below. At lease we can remove "if (r)" to be sure no extra instruction is generated.

return amdgpu_sdma_sysfs_reset_mask_init(adev);

David

  }
@@ -1391,6 +1396,7 @@ static int sdma_v7_0_sw_fini(struct amdgpu_ip_block 
*ip_block)
        for (i = 0; i < adev->sdma.num_instances; i++)
                amdgpu_ring_fini(&adev->sdma.instance[i].ring);
+ amdgpu_sdma_sysfs_reset_mask_fini(adev);
        amdgpu_sdma_destroy_inst_ctx(adev, true);
if (adev->firmware.load_type == AMDGPU_FW_LOAD_DIRECT)

Reply via email to