On Thu, Mar 14, 2024 at 9:40 PM Lee, Peyton <peyton....@amd.com> wrote: > > [AMD Official Use Only - General] > > Hi Alex > > > I think it will continue to be powered up until a VPE job comes in and > > completes and the idle handler gets scheduled. If a VPE job doesn't come > > in, it will stay powered up I think. > Yes, correct. > And after the VPE is called to do initialization, a simple test is executed > for checking VPE status, and the idle handler gets scheduled to power off the > VPE when the test finished.
Does the IB test take care of this? I just want to confirm that we aren't leaving it powered up unless a user runs a VPE workload which might not happen. Alex > > Thanks, > Peyton > > -----原始郵件----- > 寄件者: Alex Deucher <alexdeuc...@gmail.com> > 寄件日期: Thursday, March 14, 2024 8:58 PM > 收件者: Lee, Peyton <peyton....@amd.com> > 副本: amd-gfx@lists.freedesktop.org; Deucher, Alexander > <alexander.deuc...@amd.com>; Zhang, Yifan <yifan1.zh...@amd.com>; Ma, Li > <li...@amd.com>; Yu, Lang <lang...@amd.com> > 主旨: Re: [PATCH] drm/amdgpu/vpe: power on vpe when hw_init > > On Wed, Mar 13, 2024 at 9:33 PM Lee, Peyton <peyton....@amd.com> wrote: > > > > [AMD Official Use Only - General] > > > > Hi Alex, > > > > There are two places where VPE will lose power: When there is a system call > > to vpe_hw_fini(), and the vpe-thread finds that VEP has no jobs in the > > queue. > > This patch is to make sure that VPE is power up before loading firmware. > > I think it will continue to be powered up until a VPE job comes in and > completes and the idle handler gets scheduled. If a VPE job doesn't come in, > it will stay powered up I think. > > Alex > > > > > Thanks, > > Peyton > > -----原始郵件----- > > 寄件者: Alex Deucher <alexdeuc...@gmail.com> > > 寄件日期: Wednesday, March 13, 2024 9:17 PM > > 收件者: Lee, Peyton <peyton....@amd.com> > > 副本: amd-gfx@lists.freedesktop.org; Deucher, Alexander > > <alexander.deuc...@amd.com>; Zhang, Yifan <yifan1.zh...@amd.com>; Ma, > > Li <li...@amd.com>; Yu, Lang <lang...@amd.com> > > 主旨: Re: [PATCH] drm/amdgpu/vpe: power on vpe when hw_init > > > > On Wed, Mar 13, 2024 at 7:41 AM Peyton Lee <peyto...@amd.com> wrote: > > > > > > To fix mode2 reset failure. > > > Should power on VPE when hw_init. > > > > When does it get powered down again? Won't this leave it powered up? > > > > Alex > > > > > > > > Signed-off-by: Peyton Lee <peyto...@amd.com> > > > --- > > > drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c | 6 ++++++ > > > 1 file changed, 6 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c > > > b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c > > > index 70c5cc80ecdc..ecfe0f36e83e 100644 > > > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c > > > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c > > > @@ -396,6 +396,12 @@ static int vpe_hw_init(void *handle) > > > struct amdgpu_vpe *vpe = &adev->vpe; > > > int ret; > > > > > > + /* Power on VPE */ > > > + ret = amdgpu_device_ip_set_powergating_state(adev, > > > AMD_IP_BLOCK_TYPE_VPE, > > > + AMD_PG_STATE_UNGATE); > > > + if (ret) > > > + return ret; > > > + > > > ret = vpe_load_microcode(vpe); > > > if (ret) > > > return ret; > > > -- > > > 2.34.1 > > >
