Sending another one, please ignore.
Thanks,
Lijo
On 2/9/2024 12:04 PM, Lijo Lazar wrote:
> Allow reducing max UCLK in MANUAL performance level. New UCLK value
> should be less than the max DPM level UCLK level value.
>
> Ex:
> echo manual > "/sys/bus/pci/devices/.../power_dpm_force_performance_level"
> echo m 1 900 > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
> echo c > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
>
> Signed-off-by: Lijo Lazar <lijo.la...@amd.com>
> ---
> .../drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c | 103 ++++++++++++++++--
> 1 file changed, 92 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c
> b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c
> index 03873d784be6..9929981ff6c5 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c
> @@ -1578,6 +1578,8 @@ static int smu_v13_0_6_set_performance_level(struct
> smu_context *smu,
> struct smu_13_0_dpm_context *dpm_context = smu_dpm->dpm_context;
> struct smu_13_0_dpm_table *gfx_table =
> &dpm_context->dpm_tables.gfx_table;
> + struct smu_13_0_dpm_table *uclk_table =
> + &dpm_context->dpm_tables.uclk_table;
> struct smu_umd_pstate_table *pstate_table = &smu->pstate_table;
> int ret;
>
> @@ -1604,6 +1606,15 @@ static int smu_v13_0_6_set_performance_level(struct
> smu_context *smu,
>
> pstate_table->gfxclk_pstate.curr.min = gfx_table->min;
> pstate_table->gfxclk_pstate.curr.max = gfx_table->max;
> +
> + /* Min UCLK is not expected to be changed */
> + ret = smu_v13_0_set_soft_freq_limited_range(smu, SMU_UCLK, 0,
> + uclk_table->max);
> + if (ret)
> + return ret;
> + pstate_table->uclk_pstate.curr.max = uclk_table->max;
> + pstate_table->uclk_pstate.custom.max = 0;
> +
> return 0;
> case AMD_DPM_FORCED_LEVEL_MANUAL:
> return 0;
> @@ -1626,7 +1637,8 @@ static int
> smu_v13_0_6_set_soft_freq_limited_range(struct smu_context *smu,
> uint32_t max_clk;
> int ret = 0;
>
> - if (clk_type != SMU_GFXCLK && clk_type != SMU_SCLK)
> + if (clk_type != SMU_GFXCLK && clk_type != SMU_SCLK &&
> + clk_type != SMU_UCLK)
> return -EINVAL;
>
> if ((smu_dpm->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL) &&
> @@ -1636,18 +1648,31 @@ static int
> smu_v13_0_6_set_soft_freq_limited_range(struct smu_context *smu,
> if (smu_dpm->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) {
> if (min >= max) {
> dev_err(smu->adev->dev,
> - "Minimum GFX clk should be less than the
> maximum allowed clock\n");
> + "Minimum clk should be less than the maximum
> allowed clock\n");
> return -EINVAL;
> }
>
> - if ((min == pstate_table->gfxclk_pstate.curr.min) &&
> - (max == pstate_table->gfxclk_pstate.curr.max))
> - return 0;
> + if (clk_type == SMU_GFXCLK) {
> + if ((min == pstate_table->gfxclk_pstate.curr.min) &&
> + (max == pstate_table->gfxclk_pstate.curr.max))
> + return 0;
>
> - ret = smu_v13_0_6_set_gfx_soft_freq_limited_range(smu, min,
> max);
> - if (!ret) {
> - pstate_table->gfxclk_pstate.curr.min = min;
> - pstate_table->gfxclk_pstate.curr.max = max;
> + ret = smu_v13_0_6_set_gfx_soft_freq_limited_range(
> + smu, min, max);
> + if (!ret) {
> + pstate_table->gfxclk_pstate.curr.min = min;
> + pstate_table->gfxclk_pstate.curr.max = max;
> + }
> + }
> +
> + if (clk_type == SMU_UCLK) {
> + if (max == pstate_table->uclk_pstate.curr.max)
> + return 0;
> + /* Only max clock limiting is allowed for UCLK */
> + ret = smu_v13_0_set_soft_freq_limited_range(
> + smu, SMU_UCLK, 0, max);
> + if (!ret)
> + pstate_table->uclk_pstate.curr.max = max;
> }
>
> return ret;
> @@ -1740,6 +1765,40 @@ static int smu_v13_0_6_usr_edit_dpm_table(struct
> smu_context *smu,
> return -EINVAL;
> }
> break;
> + case PP_OD_EDIT_MCLK_VDDC_TABLE:
> + if (size != 2) {
> + dev_err(smu->adev->dev,
> + "Input parameter number not correct\n");
> + return -EINVAL;
> + }
> +
> + if (!smu_cmn_feature_is_enabled(smu,
> + SMU_FEATURE_DPM_UCLK_BIT)) {
> + dev_warn(smu->adev->dev,
> + "UCLK_LIMITS setting not supported!\n");
> + return -EOPNOTSUPP;
> + }
> +
> + if (input[0] == 0) {
> + dev_info(smu->adev->dev,
> + "Setting min UCLK level is not supported");
> + return -EINVAL;
> + } else if (input[0] == 1) {
> + if (input[1] > dpm_context->dpm_tables.uclk_table.max) {
> + dev_warn(
> + smu->adev->dev,
> + "Maximum UCLK (%ld) MHz specified is
> greater than the maximum allowed (%d) MHz\n",
> + input[1],
> + dpm_context->dpm_tables.uclk_table.max);
> + pstate_table->uclk_pstate.custom.max =
> + pstate_table->uclk_pstate.curr.max;
> + return -EINVAL;
> + }
> +
> + pstate_table->uclk_pstate.custom.max = input[1];
> + }
> + break;
> +
> case PP_OD_RESTORE_DEFAULT_TABLE:
> if (size != 0) {
> dev_err(smu->adev->dev,
> @@ -1750,8 +1809,19 @@ static int smu_v13_0_6_usr_edit_dpm_table(struct
> smu_context *smu,
> min_clk = dpm_context->dpm_tables.gfx_table.min;
> max_clk = dpm_context->dpm_tables.gfx_table.max;
>
> - return smu_v13_0_6_set_soft_freq_limited_range(
> + ret = smu_v13_0_6_set_soft_freq_limited_range(
> smu, SMU_GFXCLK, min_clk, max_clk);
> +
> + if (ret)
> + return ret;
> +
> + min_clk = dpm_context->dpm_tables.uclk_table.min;
> + max_clk = dpm_context->dpm_tables.uclk_table.max;
> + ret = smu_v13_0_6_set_soft_freq_limited_range(
> + smu, SMU_UCLK, min_clk, max_clk);
> + if (ret)
> + return ret;
> + pstate_table->uclk_pstate.custom.max = 0;
> }
> break;
> case PP_OD_COMMIT_DPM_TABLE:
> @@ -1771,8 +1841,19 @@ static int smu_v13_0_6_usr_edit_dpm_table(struct
> smu_context *smu,
> min_clk = pstate_table->gfxclk_pstate.custom.min;
> max_clk = pstate_table->gfxclk_pstate.custom.max;
>
> - return smu_v13_0_6_set_soft_freq_limited_range(
> + ret = smu_v13_0_6_set_soft_freq_limited_range(
> smu, SMU_GFXCLK, min_clk, max_clk);
> +
> + if (ret)
> + return ret;
> +
> + if (!pstate_table->uclk_pstate.custom.max)
> + return 0;
> +
> + min_clk = pstate_table->uclk_pstate.curr.min;
> + max_clk = pstate_table->uclk_pstate.custom.max;
> + return smu_v13_0_6_set_soft_freq_limited_range(
> + smu, SMU_UCLK, min_clk, max_clk);
> }
> break;
> default:
