Hi, I have updated my old Fujitsu S920 with AMD GX-424CC from Ubuntu 22.04 LTS to Debian 12. The system worked fine before, after the installation completed, my logs are flooded by the following error messages:
dmesg: [ 967.869183] radeon 0000:00:01.0: 000000003ba3c813 pin failed [ 967.869212] [drm:radeon_crtc_page_flip_target [radeon]] *ERROR* failed to pin new rbo buffer before flip [ 967.886254] radeon 0000:00:01.0: 0000000051be2216 pin failed [ 967.886282] [drm:radeon_crtc_page_flip_target [radeon]] *ERROR* failed to pin new rbo buffer before flip [ 967.907984] radeon 0000:00:01.0: 000000003ba3c813 pin failed [ 967.908014] [drm:radeon_crtc_page_flip_target [radeon]] *ERROR* failed to pin new rbo buffer before flip [ 967.925551] radeon 0000:00:01.0: 0000000051be2216 pin failed[ 967.925580] [drm:radeon_crtc_page_flip_target [radeon]] *ERROR* failed to pin new rbo buffer before flip Xorg.log [ 47.777] (WW) RADEON(0): flip queue failed: Invalid argument [ 47.777] (WW) RADEON(0): Page flip failed: Invalid argument[ 47.777] (EE) RADEON(0): present flip failed lspci: 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Technology Solutions Mullins [Radeon R4/R5 Graphics] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 35 Region 0: Memory at f8000000 (64-bit, prefetchable) [size=64M] Region 2: Memory at fc000000 (64-bit, prefetchable) [size=8M] Region 4: I/O ports at f000 [size=256] Region 5: Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [48] Vendor Specific Information: Len=08 <?> Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag+ RBE+ FLReset- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr+ FatalErr- UnsupReq+ AuxPwr- TransPend- DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled, AtomicOpsCtl: ReqEn- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee08004 Data: 0023 Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [270 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [2b0 v1] Address Translation Service (ATS) ATSCap: Invalidate Queue Depth: 00 ATSCtl: Enable-, Smallest Translation Unit: 00 Capabilities: [2c0 v1] Page Request Interface (PRI) PRICtl: Enable- Reset- PRISta: RF- UPRGI- Stopped+ Page Request Capacity: 00000020, Page Request Allocation: 00000000 Capabilities: [2d0 v1] Process Address Space ID (PASID) PASIDCap: Exec+ Priv+, Max PASID Width: 10 PASIDCtl: Enable- Exec- Priv- Kernel driver in use: radeon Kernel modules: radeon, amdgpu I'm a bit confused. Is this an kernel issue, Xorg issue or something else? kernel: Linux debian 6.1.0-13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.55-1 (2023-09-29) x86_64 GNU/Linux Xorg: [ 33.144] X.Org X Server 1.21.1.7 X Protocol Version 11, Revision 0 [ 33.144] Current Operating System: Linux debian 6.1.0-13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.55-1 (2023-09-29) x86_64 [ 33.144] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64 root=UUID=4101c568-e073-42f4-8dfe-08373fceb13c ro quiet [ 33.144] xorg-server 2:21.1.7-3 (https://www.debian.org/support) [ 33.144] Current version of pixman: 0.42.2 [ 33.144] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. I searched bug tracker and could only find this issue: https://gitlab.freedesktop.org/xorg/driver/xf86-video-ati/-/issues/180 but I don't have a black screen. The system is rather sluggish but seems to work. Any hints where to go next is very appreciated. Best Regards
