Ctirad Feřtr wrote: > i have problem to set the hda-intel analog output to index 0. The > index=-2 does not work as expected on some configurations. > > On a PC with just an onboard HDA there are HDMI id on index 0 and PCH > id on index 1. When I modprobe the module with the id=HDMI index=-2, > the PCH is on index 0 and HDMI on index 1 as expected. > > BUT, if I insert a graphics card with its own HDMI and load the module > with the same options as above, the PCH id is renamed to HDMI_1 and > occupies index 1, while the HDMI from gfx card is on index 0. Same > with parameters id=HDMI index=2 or any other index.
These parameters affect the first device that is seen by the driver. Use multiple values: index=2,1,0 Regards, Clemens ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
