I can't get any sound over HDMI from my ION2 based system. I have the
sound drivers compiled into the kernel. Everything seem ok, but I get
no sound other than through the analog Intel device (front jack).
Here's some output from lspci
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio
Controller (rev 02)
Subsystem: ZOTAC International (MCO) Ltd. Device a140
Kernel driver in use: HDA Intel
03:00.0 VGA compatible controller: nVidia Corporation GT218 [ION] (rev a2)
Subsystem: PC Partner Limited Device 3100
Kernel driver in use: nvidia
Kernel modules: nvidia
03:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev
a1)
Subsystem: PC Partner Limited Device 3100
Kernel driver in use: HDA Intel
This is a git compiled kernel on a Gentoo system:
# uname -vspor
Linux 2.6.34-rc7-00106-g6a251b0 #2 SMP Sun May 16 11:53:12 CEST 2010 Intel(R)
Atom(TM) CPU D510 @ 1.66GHz GNU/Linux
I can see the devices using either aplay -L or by looking at proc.
# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
# aplay -L
default:CARD=Intel
HDA Intel, ALC888 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC888 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=NVidia
HDA NVidia, NVIDIA HDMI
HDMI Audio Output
# cat /proc/asound/devices
0: [ 0] : control
6: [ 0- 2]: hardware dependent
16: [ 0- 0]: digital audio playback
17: [ 0- 1]: digital audio playback
24: [ 0- 0]: digital audio capture
32: [ 1] : control
33: : timer
36: [ 1- 0]: hardware dependent
37: [ 1- 1]: hardware dependent
38: [ 1- 2]: hardware dependent
39: [ 1- 3]: hardware dependent
51: [ 1- 3]: digital audio playback
55: [ 1- 7]: digital audio playback
56: [ 1- 8]: digital audio playback
57: [ 1- 9]: digital audio playback
Using any of:
aplay -D hw:1,3 test.wav
aplay -D hw:1,7 test.wav
aplay -D hw:1,8 test.wav
aplay -D hw:1,9 test.wav
aplay -D hdmi:CARD=NVidia test.wav
does not result in any sound on my TV (where I have verified that
other HDMI devices can play audio on the same HDMI port). "aplay -D
hw:0,0 test.wav" will play audio fine through the front analog jack.
Any ideas?
Thanks
//Petter
------------------------------------------------------------------------------
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
