Hi
I am a total novice so I'd better start with the apology - sorry for missing
info or stupid questions.
I have had Debian (etch) running on an old Gateway Pentium for a couple of
years. I've only learnt about linux when I've had to and generally it has all
been great.
I now have a new Advent QC6003 with Intel Quad Q8200 CPU and IDT 92HD73E HD
Audio Codec sound card. Sound works fine in windows. I have installed Debian
Lenny and it looks great but I can't get sound to work. I can use alsamixer in
a terminal and use GNOME Alsa Mixer and have checked that the mute switches are
off.
I have searched online and on these lists but been unable to find anyone with
the same problem or with a solution.
lspci gives
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller
(rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset
Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated
Graphics Controller (rev 03)
00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI
Controller (rev 03)
00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER
Controller (rev 03)
00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT
Controller (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82567LF-2 Gigabit Network
Connection
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI
Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI
Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller
01:01.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
alsa-info output is at
www.alsa-project.org/db/?f=cde6f8bf1c0388827c171edcfa22c21f7f78850a
aadebug output is:
ALSA Audio Debug v0.1.0 - Wed Sep 9 20:27:03 BST 2009
http://alsa.opensrc.org/aadebug
http://www.gnu.org/licenses/gpl.txt
Kernel ----------------------------------------------------
Linux huwbian 2.6.26-2-amd64 #1 SMP Wed Aug 19 22:33:18 UTC 2009 x86_64
GNU/Linux
Loaded Modules --------------------------------------------
snd_seq_dummy 7428 0
snd_hda_intel 436696 1
snd_pcm 81800 1 snd_hda_intel
snd_seq 54304 1 snd_seq_dummy
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 2 snd_seq_dummy,snd_seq
snd 63688 7
snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
Modprobe Conf ---------------------------------------------
Warning: module config file does not exist
This means any kernel modules will not be auto loaded
See your linux distro docs on how to create this file
Proc Asound -----------------------------------------------
Advanced Linux Sound Architecture Driver Version 1.0.16.
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xff620000 irq 22
0: [ 0] : control
1: : sequencer
16: [ 0- 0]: digital audio playback
17: [ 0- 1]: digital audio playback
24: [ 0- 0]: digital audio capture
33: : timer
cat: /proc/asound/hwdep: No such file or directory
00-01: STAC92xx Digital : STAC92xx Digital : playback 1
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2
Client info
cur clients : 2
peak clients : 2
max clients : 192
Client 0 : "System" [Kernel]
Port 0 : "Timer" (Rwe-)
Port 1 : "Announce" (R-e-)
Client 14 : "Midi Through" [Kernel]
Port 0 : "Midi Through Port-0" (RWe-)
Dev Snd ---------------------------------------------------
controlC0 pcmC0D0c pcmC0D0p pcmC0D1p seq timer
CPU -------------------------------------------------------
model name : Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
cpu MHz : 1998.000
model name : Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
cpu MHz : 1998.000
model name : Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
cpu MHz : 1998.000
model name : Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
cpu MHz : 1998.000
RAM -------------------------------------------------------
MemTotal: 6030588 kB
SwapTotal: 11044648 kB
Hardware --------------------------------------------------
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller
(rev 03)
I think the problem is here:
Modprobe Conf ---------------------------------------------
Warning: module config file does not exist
This means any kernel modules will not be auto loaded
See your linux distro docs on how to create this file
I have no etc/modprobe.conf file.
I followed wiki.debian.org in using module-assistant to install and update alsa
but it still won't work.
What should I do next?
Huw
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
