On Wed, Nov 19, 2008 at 11:44 PM, Chris Pimlott <[EMAIL PROTECTED]> wrote:
> I'm trying to get HDMI audio working on a ALC1200 integrated audio card on
> an Asus P5Q-EM motherboard (Intel G45 chipset).
>
> I notice there is a lot of ongoing work on this chipset at the moment, but
> from what I gather, it should work. Because of this, I made sure to try the
> latest code, both 1.0.18 and 1.0.18a.
>
> I am eager to get this going and I'll be happy to provide any additonal
> information necessary. I've found and run one data-gathering script, the
> results of which are here:
> http://pastebin.ca/1262017
>
Here's results of the same tsalsa script with alsa 1.0.18:
http://pastebin.ca/1262586
The major differences between them:
--- tsalsa-1.0.18 2008-11-20 08:05:36.000000000 -0500
+++ tsalsa-1.0.18a 2008-11-20 08:05:44.000000000 -0500
@@ -30,7 +30,7 @@
Lspci info:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller
-Alsa driver: 1.0.18
+Alsa driver: 1.0.18a
dpkg path: /usr/bin/dpkg
Alsa utils: 1.0.17
@@ -85,6 +85,7 @@
amixer set 'Mic Boost',0 0% 0%
amixer set 'IEC958',0 on
amixer set 'IEC958 Default PCM',0 on
+amixer set 'IEC958',1 on
amixer set 'Capture',0 Capture 0 0%,Capture 0 0% on
amixer set 'Capture',1 Capture 0 0%,Capture 0 0% on
amixer set 'Input Source',0 Items: 'Mic' 'Front Mic' 'Line' Item0: 'Mic'
@@ -183,6 +184,10 @@
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
+Simple mixer control 'IEC958',1
+ Capabilities: pswitch pswitch-joined
+ Playback channels: Mono
+ Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
@@ -232,7 +237,7 @@
snd_seq/parameters/seq_client_load:14,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
snd_seq/parameters/seq_default_timer_card:-1
snd_seq/parameters/seq_default_timer_class:1
-snd_seq/parameters/seq_default_timer_device:0
+snd_seq/parameters/seq_default_timer_device:3
snd_seq/parameters/seq_default_timer_resolution:0
snd_seq/parameters/seq_default_timer_sclass:0
snd_seq/parameters/seq_default_timer_subdevice:0
@@ -281,6 +286,9 @@
card 0: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
+card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI]
+ Subdevices: 1/1
+ Subdevice #0: subdevice #0
arecord -l:
**** List of CAPTURE Hardware Devices ****
@@ -313,9 +321,6 @@
surround71:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
-hdmi:CARD=Intel,DEV=0
- HDA Intel
- HDMI Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
@@ -326,6 +331,7 @@
5: [ 0- 1]: hardware dependent
16: [ 0- 0]: digital audio playback
17: [ 0- 1]: digital audio playback
+ 19: [ 0- 3]: digital audio playback
24: [ 0- 0]: digital audio capture
26: [ 0- 2]: digital audio capture
33: : timer
@@ -725,7 +731,7 @@
Conn = 1/8, Color = Pink
DefAssociation = 0x5, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
- Unsolicited: tag=08, enabled=1
+ Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
@@ -809,7 +815,7 @@
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
- Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
+ Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
@@ -826,7 +832,7 @@
Amp-Out vals: [0x00 0x00]
Connection: 2
0x25 0x0b
-Codec: Generic 8086 ID 2803
+Codec: Generic 8086 INTEL G45 DEVELK
Address: 1
Vendor Id: 0x80862803
Subsystem Id: 0x80860101
@@ -854,14 +860,14 @@
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
- Pin-ctls: 0x40: OUT
- Unsolicited: tag=00, enabled=0
+ Pin-ctls: 0x00:
+ Unsolicited: tag=08, enabled=1
Connection: 1
0x02
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
