On Sat, 29 Mar 2008 22:37:25 +0100 Ruediger Dohmhardt <[EMAIL PROTECTED]> wrote:
> Hal V. Engel schrieb: > > On Friday 04 January 2008 09:43:31 D.H.J. Takken wrote: > > > > Dik, > > > > I have a Revo 7.1 which uses the same driver. At least with current ALSA > > drivers the Revo 7.1 works nicely. The biggest issues I think are related > > to > > the names used for the controls not being very user meaningful. But once I > > got the drivers configured it has worked very well. > > > Dear Hal, > > I also have the M-Audio Revolution 7.1. The outputs work fine. > Unfortunately, I lack volume and capture mixer (in alsamixer) > for all inputs. > > Though, I can record from "Line-In" with , e.g. , > > arecord -f dat -d 5 test.wav > > but the volume is very, very low. Hence , I guess if I had the > capture (or volume) mixer, > I could make a "regular" recording with respect to volume. > Maybe you can send me your /etc/asound.conf. > > I installed alsa-1.0.16 from source. > > cat /proc/asound/version > Advanced Linux Sound Architecture Driver Version 1.0.16. > Compiled on Mar 29 2008 for kernel 2.6.22.19. > > > arecord -l > **** List of CAPTURE Hardware Devices **** > card 0: Revolution71 [M Audio Revolution-7.1], device 0: ICE1724 > [ICE1724] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > > Many thanks in advance > > Ciao Ruediger D. > > Revolution 7.1 does not have capture volume control in HW. Probably 'softwol' plugin can help, but I'm not the one to ask how to create ALSA configuration files. Regards, Sergei. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
