Hello!
I have a system which has to run, with two soundcard. The old ones are
"died", so I bought two Genius Soundmaker 5.1. My old kernel is 2.6.4,
and the alsa version, which cames with this kernel is 1.0.2. The two
card, was shown by the kernel, but just the first was adjustable with
alsamixer. When I started alsamixer with the second one, it hangs or
didn't do anything, it was only respond to the ESC button.
I compiled the last (2.6.24.2) kernel, and the 1.0.15 lib, and the utils then.
The driver shows, the card, but every util tells: no soundcards found
This is the last state withe the 2.6.24.2 kernel, and the 1.0.15 lib, and utils:
lspci:
0:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
I/O ports at a000 [size=256]
Capabilities: [c0] Power Management version 2
devices:
2: : timer
3: : sequencer
4: [ 0- 2]: digital audio playback
5: [ 0- 2]: digital audio capture
6: [ 0- 1]: digital audio playback
7: [ 0- 0]: digital audio playback
8: [ 0- 0]: digital audio capture
9: [ 0] : control
cards:
0 [CMI8738 ]: CMI8738-MC6 - C-Media CMI8738
C-Media CMI8738 (model 55) at 0xa000, irq 10
arecord -l:
arecord: device_list:205: no soundcards found...
The last one is sad by all the utils which based on alsa lib. (My
application too.)
Does anybody know what's the problem?
Thanks in advance
Janos Makadi
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
