> The problem is that I can't hear two concurrent audio streams at the > same time when using the default device. I tried setting things up using > dmix, but failed miserably. Any ideas what to do to make two > applications play simultaneously through spdif based on this > configuration? (It's mainly to get Flash to play through S/PDIF).
The default ALSA config dmixes everything at 48kHz so you shouldn't need to set that explicitly. All you should need to do is tell dmix to output via SPDIF. For me, hw:0,1 is the SPDIF connector, so I just put this in /etc/asound.conf: defaults.pcm.card 0 defaults.pcm.device 1 You can also set this if you want something other than 48kHz: defaults.pcm.dmix.rate 48000 Make sure you use Flash >= 9 for ALSA support. Cheers, Adam. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
