>> I've used the modules.d/sound script for the hdsp as suggested in
>> several emails and websites. The problem is the card doesn't appear
>> in Jack, Qjackctl or many other things.
>How do you check? have a look in /proc/asound/cards if your hdsp is
mentioned there. Does hdspmixer work?
#cat /proc/asound/cards
0 [I82801CAICH3 ]: ICH - Intel 82801CA-ICH3
Intel 82801CA-ICH3 with AD1886A at 0x4000, irq 5
1 [DSP ]: H-DSP - Hammerfall DSP
RME Hammerfall DSP + Multiface at 0x24000000, irq 11
As per prior listing.
Yes, hdspmixer does work from both a menu and a console window.
>If everything seems ok, write the following in your .asoundrc (create the
file if it doesn't exist in your >home directory):
>
>pcm.multiface_test {
> type plug
> ttable.0.0 1
> ttable.1.1 1
> slave.pcm {
> type hw
> card 0
> }
>}
>
>
>and then try
>aplay -D multiface_test SOME_WAVE_FILE.WAV
>(you have to change the card number 'card 0' if the hdsp is not the first
card in your system. you can get >the card number from
>/proc/asound/cards)
>
>
File .asoundrc does exist in home directory but contains listing starting
pcm.hdsp... From http://www.linuxjournal.com/article/7024#comment-9587
Structure seems to be the same. But I mv-ed to .asoundrc.old and recreated
with your listing...
Didn't work immediately so rebooted...
Wow, does work with hdspmixer loaded but not otherwise, I think I have made
some progress, many thanks. Now I need to work out how to use JACK etc and
working with a recording prog... Back to the reading post. But first might
change back to the old listing and see whether that works as above. Yup,
works as hdsp_analog as per the listing but does need to have the hdspmixer
running (at least to start with).
At last I think I have made some progress. I'll check the other page as
suggested.
Many thanks again, you have helped to restore some sanity in my daily life.
-----Original Message-----
From: Friedrich Ewaldt [mailto:[EMAIL PROTECTED]
Sent: Monday, 27 November 2006 3:30 AM
To: Tim Barker
Cc: Alsa-User
Subject: Re: [Alsa-user] RME HDSP and Suse 10.1, will NOT work...
Tim Barker schrieb:
...
> The card appears to be recognised by the system, the red light on the
> front of the breakout box does extinguish on startup as expected (and
> even extinguishes when inserting the card while the system is running,
> which surprised me).
hotplug should work. this is ok.
> I've used the modules.d/sound script for the hdsp as suggested in
> several emails and websites. The problem is the card doesn't appear
> in Jack, Qjackctl or many other things.
How do you check? have a look in /proc/asound/cards if your hdsp is
mentioned there. Does hdspmixer work?
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
