what does it give as output the command
cat /proc/asound/devices ?
Is the directory /proc/asound/card0 empty or does it contain any files?
is the directory /dev/snd empty or does it contain any files?
what does it give as output the command
lsmod | grep -E "alsa|snd|sound|hda"

I don't know if the module snd-hda-codec is necessary to be loaded too....

What does contain the file /etc/asound.conf and/or your home .asoundrc if any?
Gianluca


On 6/19/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> I am using gentoo 2006.0 emerged up to date
>
> Regards
>
> Tim
>
> - original message -
> Subject:        Re: [Alsa-user] AD1986A problems
> From:   "Gianluca Cecchi" <[EMAIL PROTECTED]>
> Date:           19/06/2006 2:07 pm
>
> You forgot to mention your os specs: distro, release number, patches etc....
> AFAIK, 2.6.17 comes with alsa 1.0.11rc4 + some fixes, not 1.0.11 final
> release
> See http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.17 and search
> for the string "1.0.1"
> Knowing your os specs could help guessing....
>
> BTW (for developers): are there particular reasons why final 2.6.17 contains
> yet the rc4 release and not the 1.0.11 final, released about two months ago?
> Technical, people too busy, difficluties in synchronizing branches or other
> reasons? If the problem depends on not enough time/people to test against
> new versions before going to release, I could give my (little) help or
> eventually a page on alsa web site could produce useful effects. Probably to
> have kernel and alsa in better sync could help generally.
> I don't know exactly the internals of alsa/kernel syncing so excuse me in
> advance if my thoughts are trivial.
>
> Thanks in advance,
> Gianluca
>
>
> On 6/19/06, Tim Jordan <[EMAIL PROTECTED]> wrote:
> >
> > I have been trying to get the sound working on my
> > Asus A8N-VM MB
> > the chip is a AD1986A, which according to posts on google and on the
> > nvnews website should be supported by alsa 1.0.11 and the 2.6.17 kernel.
> > Using the Alsa method I install the driver and the utils package and then
> > run alsaconf, this advises me that I have a hda-intel Nvidia MCP-51 High
> > Definition Audio (rev 2a) which I select and then let the alsa util modify
> > the alsa file in modules.d/alsa
> > when the alsaconf tries to run the init script it errors with hda-intel:
> > no codecs found!
> > I have tried forcing the model by appending the line options snd-hda-intel
> > model=AD1986A
> > again I get the error above.
> > below is my alsa file
> > *Code:*
> > #ALSA portion
> >         alias char-major-116 snd
> >         alias snd-card-0 snd-hda-intel
> > # module options should go here
> > options snd-hda-intel model=AD1986A
> >
> > # OSS/Free portion
> >
> > # card #1
> >
> > # --- BEGIN: Generated by ALSACONF, do not edit. ---
> > # --- ALSACONF version 1.0.11 ---
> > alias snd-card-0 snd-hda-intel
> > alias sound-slot-0 snd-hda-intel
> > # --- END: Generated by ALSACONF, do not edit. ---
> >  and this is the output from lspci -vv
> > 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev
> > a2)
> >         Subsystem: nVidia Corporation Unknown device cb84
> >         Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> > ParErr- Stepping- SERR- FastB2B-
> >         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> > <TAbort- <MAbort- >SERR- <PERR-
> >         Interrupt: pin B routed to IRQ 209
> >         Region 0: Memory at febd8000 (32-bit, non-prefetchable) [size=16K]
> >         Capabilities: [44] Power Management version 2
> >                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> > PME(D0-,D1-,D2-,D3hot+,D3cold+)
> >                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0
> > Enable-
> >                 Address: 0000000000000000  Data: 0000
> >         Capabilities: [6c] HyperTransport: MSI Mapping
> >
> >
> > Any and all help would be appreciated
> >
> > Regards
> >
> > Tim
> >
> >
> >
> > _______________________________________________
> > Alsa-user mailing list
> > Alsa-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/alsa-user
> >
> >
> >
>
>


_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to