Hi, Can you hear mic through speakers (headphone) ? Could you try to record from device 1 (this is not very usable - but it bypass mixer) ?
Peter Zubaj On Wed, 2006-06-14 at 02:34 -0700, David Liontooth wrote: > On an Audigy 2 Value SB0400 I'm unable to record from the microphone. > > Sound output is working fine. I plugged the microphone into the red jack > and tried to record using audacity, > but get no response. > > # arecord -l > **** List of CAPTURE Hardware Devices **** > card 0: Audigy2 [Audigy 2 Value [SB0400]], device 0: emu10k1 [ADC > Capture/Standard PCM Playback] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: Audigy2 [Audigy 2 Value [SB0400]], device 1: emu10k1 mic [Mic > Capture] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: Audigy2 [Audigy 2 Value [SB0400]], device 2: emu10k1 efx > [Multichannel Capture/PT Playback] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > # lsmod | grep snd > snd_pcm_oss 46368 0 > snd_mixer_oss 14848 5 snd_pcm_oss > snd_emu10k1 110084 4 > snd_rawmidi 21344 1 snd_emu10k1 > snd_ac97_codec 98492 1 snd_emu10k1 > snd_ac97_bus 2560 1 snd_ac97_codec > snd_pcm 78600 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec > snd_seq_device 7440 2 snd_emu10k1,snd_rawmidi > snd_timer 20360 2 snd_emu10k1,snd_pcm > snd_page_alloc 8656 2 snd_emu10k1,snd_pcm > snd_util_mem 4032 1 snd_emu10k1 > snd_hwdep 8264 1 snd_emu10k1 > snd 49056 9 > snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep > > # amixer controls | grep Capture > numid=8,iface=MIXER,name='PCM Capture Volume' > numid=9,iface=MIXER,name='Synth Capture Volume' > numid=17,iface=MIXER,name='Line2 Capture Volume' > numid=11,iface=MIXER,name='Mic Capture Volume' > numid=21,iface=MIXER,name='Aux2 Capture Volume' > numid=15,iface=MIXER,name='IEC958 Optical Capture Volume' > numid=19,iface=MIXER,name='Analog Mix Capture Volume' > numid=13,iface=MIXER,name='Audigy CD Capture Volume' > numid=32,iface=PCM,name='Captured FX8010 Outputs',device=2 > > # amixer -c 0 cset numid=11 50%,50% unmute cap > numid=11,iface=MIXER,name='Mic Capture Volume' > ; type=INTEGER,access=rw---,values=2,min=0,max=100,step=0 > : values=50,50 > > # amixer -c 0 cget numid=19 > numid=19,iface=MIXER,name='Analog Mix Capture Volume' > ; type=INTEGER,access=rw---,values=2,min=0,max=100,step=0 > : values=50,50 > > I run this while talking into the microphone: > > # arecord -d 5 -N -vvv foobar.wav > Recording WAVE 'foobar.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono > Plug PCM: Linear conversion PCM (S16_LE) > Its setup is: > stream : CAPTURE > access : RW_INTERLEAVED > format : U8 > subformat : STD > channels : 1 > rate : 8000 > exact rate : 8000 (8000/1) > msbits : 8 > buffer_size : 2048 > period_size : 1024 > period_time : 128000 > tick_time : 1000 > tstamp_mode : NONE > period_step : 1 > sleep_min : 0 > avail_min : 1024 > xfer_align : 1024 > start_threshold : 1 > stop_threshold : 2048 > silence_threshold: 0 > silence_size : 0 > boundary : 4611686018427387904 > Slave: Hardware PCM card 0 'Audigy 2 Value [SB0400]' device 0 subdevice 0 > Its setup is: > stream : CAPTURE > access : MMAP_INTERLEAVED > format : S16_LE > subformat : STD > channels : 1 > rate : 8000 > exact rate : 8000 (8000/1) > msbits : 16 > buffer_size : 2048 > period_size : 1024 > period_time : 128000 > tick_time : 1000 > tstamp_mode : NONE > period_step : 1 > sleep_min : 0 > avail_min : 1024 > xfer_align : 1024 > start_threshold : 1 > stop_threshold : 2048 > silence_threshold: 0 > silence_size : 0 > boundary : 4611686018427387904 > Max peak (1024 samples): 0x00000001 # 0% > Max peak (1024 samples): 0x00000001 # 0% > > No sound input appears to be detected. When I play the file, I get a > low-level static: > > # aplay foobar.wav > Playing WAVE 'foobar.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono > > Suggestions? Am I looking at the wrong channels? > > David > _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
