Yeaaaah, that's a great day ! It works !!!! You're really the best informatician that I know ! Congratulations Rene ! Excuse-me, I jump the step 18, because my wife don't share my passion about computers and would be jealous of this practice... ! I'm astonish about your patience, your job is to assure support of alsa ? Any way, I'm very happy to have discussed with you about Alsa. I'll write a how-to to configure sound with Alsa on Dell Latitude CP MMX 233 Pentium II, but before, I have one last thing to do. I wanted obtain Alsa because that's more quickly and there is a best quality to listen music. And, I project to see video ! Mplayer conceptors recommand to use Alsa for his rapidity. Now, I will try to see divx ! A new chalenge and a new adventure, and become, one day, a real geek as you ?...
Oups, I forget to automatise this ! OK, I'm listening you ! Rene Herman a écrit : > Hulin Thibaud wrote: > >> # modprobe snd-cs4236 isapnp=0 port=0x530 cport=Ox210 irq=5 dma1=1 dma2=0 > > <NUL>x210, not <OOH>x210 > >> # cat /sys/devices/pnp0/00:0f/id >> CSC0010 >> # cat /sys/devices/pnp0/00:0f/resources >> state = active >> io 0x210-0x217 > >> # cat /sys/devices/pnp0/00:10/id >> CSC0000 >> # cat /sys/devices/pnp0/00:10/resources >> state = disabled >> io 0x530-0x537 >> io 0x388-0x38b >> io 0x220-0x22f >> irq 5 >> dma 1 >> dma 0 > > In an earlier posting you showed 00:0f to be CSC0000 and 00:10 to be > CSC0010. But oh well, this way things are as expected. In another > earlier posting I showed how to enable disabled devices. > > Please don't do any of these things "from a script" by the way. Just > open a so called root shell (in stead of "shell", it might be called a > "console" in the menus). If there's no seperate "root shell/console" > entry in the menus, open a normal shell/console from the menus and type > "su". You should now be asked for your root password, upon the supplying > of which you will have become the root user. > > The state you showed above was after you tried loading drivers already > which might have enabled/disabled things. Please do exactly as follows: > > 1) turn off your computer > 2) turn on your computer and let it boot > 3) open that root shell. > 4) cat /sys/devices/pnp0/00:0f/resources > > does it still say (for all these, with possibly different values): > > (I) state = active > io 0x210-0x217 > > if so, great, goto 7. If not, does it say: > > state = disabled > io 0x210-0x217 > > if so, semi-great, goto 6. If it just says > > state = disabled > > do > > 5) echo auto >/sys/devices/pnp0/00:0f/resources > 6) echo activate >/sys/devices/pnp0/00:0f/resources > > It should now look as indicated at (I) > > 7) cat /sys/devices/pnp0/00:0f/resources > > does it say > > (II) state = active > io 0x530-0x537 > io 0x388-0x38b > io 0x220-0x22f > irq 5 > dma 1 > dma 0 > > if so, great, goto 10. If not, does it say: > > state = disabled > io 0x530-0x537 > io 0x388-0x38b > io 0x220-0x22f > irq 5 > dma 1 > dma 0 > > if so, semi-great, goto 9. If it just says > > state = disabled > > do > > 8) echo auto >/sys/devices/pnp0/00:0f/resources > 9) echo activate >/sys/devices/pnp0/00:0f/resources > > It should now look as indicated at (II). > > Using the values from those resource files (ie, substitute if they are > different) do: > > 10) modprobe snd-cs4236 isapnp=0 port=0x530 cport=0x210 irq=5 dma1=1 dma2=0 > 11) If it loaded, great, goto 14. > > 12) modprobe snd-cs4236 isapnp=0 port=0x534 cport=0x210 irq=5 dma1=1 dma2=0 > 13) if it did not load, goto 18 > > 14) start "alsamixer" > 15) unmute (press "M" while on them) and turn up the master and PCM volumes > > if you have an hardware way of setting the volume (a knob) as well, it's > adviced to set the master volume to 89 and the PCM volume to 87 and > leave them at that, using the knob to make it louder/quieter. > > 16) play music and be jolly > 17) stop here > > 18) repeatedly bang your head on the laptop until it's broken beyond any > hope of salvation > 19) stop here > > I really need to know first if things work when you do as described. If > so, we can look at PnP to automate this. If not, I'm out of advice. > > Rene. > > > > _______________________________________________ > Alsa-user mailing list > Alsa-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-user > > _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
