Hello, I recently started using my sb extigy as my default output device. The first time I tried, mplayer would resample everything to 48 khz, but after a reboot 44.1 khz seems to work fine. As far as i can tell, sound is good and the amplifier seems bettr than the one on my sb live.
However, when I connect output of my regular amplifier to the line-in of the extigy, sound quality is poor. Not over-modulated or something like that, the tone balance is completely different from the original. Treble and bass are set to 50% (48). to check if this is a line-in problem, or a problem with the extigy amp that I didn't hear, I connected the output of my stereo set to the line-in of my sb live and typed: ecasound -i alsahw,1 -o alsa and listned to the result. Sound was OK. So in my opinion something is wrong when a signal goes straight from line-in to line-out on the extigy. My question is: is this a problem with the extigy, or maybe an initialization problem that can be solved? Kind regards, Henk. ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
