Hej - I want to have a simply soundcard delaytest.
I need an external soundsource as a reference signal.
What I did was this :
mono source to stereo source
left channel directly to left channel of recording device
right channel sent to ALSA-PC LineIn
line out of PC sent to right channel of recording device
The gap between the left and the right channel indicates the delay BUT the
ALSA PC sends the input directly bypassing the soundcard which is why I
measure a delay of 0 ms (same signal of course).
When I´m muting the capture channel the signal might get captured but I
doesn´t appear on the master anymore.
So - I can't switch the monitoring off - now I'm using a Soundblaster MP3+
USB soundcard which mirrors the input even when PCM and all other (except
speaker) is lowered to zero. Can anyone help ???
Thanks
-- A l e x
> On Wed, Apr 14, 2004 at 02:57:40 +0200, "Alexander Carôt" wrote:
> > > You have to set which input you want to be recorded from.
> >
> > I attached a screenshot the mixer for my USB device is on.
> >
> > I want to have the input source signal on the left and the soundcard
> output
> > signal on the right or
> > both of them on one channel if I still canfigure out the delay.
>
> I've done it by running a loopback cable from the line out to the line in.
> Then record one channle of the soundcard input and one channel of an
> jack client.
>
> eg:
>
> alsa_pcm:capture_1 ------------------>
> jack recorder
> ----------------------------->
> AMS
> ----------------------------------------> alsa_pcm:playback_1
>
> Hope that makes sense
>
> - Steve
>
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
