André Heßling wrote: > Clemens Ladisch <[EMAIL PROTECTED]> wrote: > > Daniel K. Gebhart wrote: > > > [EMAIL PROTECTED] arecord -l > > > card 0: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5] > > > card 0: ICH5 [Intel ICH5], device 1: Intel ICH - MIC ADC [Intel ICH5 - MIC ADC] > > > card 0: ICH5 [Intel ICH5], device 2: Intel ICH - MIC2 ADC [Intel ICH5 - MIC2 ADC] > > > card 0: ICH5 [Intel ICH5], device 3: Intel ICH - ADC2 [Intel ICH5 - ADC2] > > > > Try recording from hw:0,3 (e.g. "arecord -D hw:0,3 -f dat test.wav").
Actually, the driver routes all data to hw:0,0 (which is the default device anyway). hw:0,2 and 3 won't work at all. > Mic is only very very quiet (if it works) and LineIn is not working. > In alsamixer everything is set to max and unmuted. I think the driver assumes that the codec is the second codec for additional surround channels or something like that, and accesses the wrong mixer registers. What are the contents of /proc/asound/card0/codec97#0/ac97#0-0+regs? And what mainboard is this? Regards, Clemens ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
