I Managed to get it to work.

All I did was to change "pcm out" to "pre 3D" from "post 3D".

I still wonder how come the only fader that works is the master volume...


At 03:25 PM 4/7/2004, Clemens Ladisch wrote:
Gil Disatnik wrote:
> Alsa worked pretty much flawlessly with 2.4.x.
> When I upgraded to 2.6 (.3) I noticed that I can only change the master
> volume, changing the PCM wouldn't do anything which was pretty annoying but
> I managed..
> Same problem occurred with 2.6.4.
> Yesterday I finally had the time to build 2.6.5 (I saw many alsa stuff on
> the changelog and hoped it might rectify the previous issue). Alas - the
> sound has stopped working completely.
>
> lspci shows: Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97
> Audio Controller (rev 01)

What codec do you have? (see /proc/asound/card0/codec97#0/ac97#0-0)

What are the contents of /etc/asound.state after running
"alsactrl store"?


Regards, Clemens


Regards

Gil Disatnik
UNIX system administrator.

[EMAIL PROTECTED]
http://gil.disatnik.com

_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
apt-get install slackware
--------------------------------------------------------------------
"Windows NT has detected mouse movement, you MUST restart
your computer before the new settings will take effect, [ OK ]"
--------------------------------------------------------------------
Windows is a 32 bit patch to a 16 bit GUI based on a 8 bit operating
system, written for a 4 bit processor by a 2 bit company which can
not stand 1 bit of competition.
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to