Ingo & Clemens mentioned that I needed kernel headers so I tried 'apt-install kernel-headers-2.4.18-bf2.4' - apparently successfully.
I did not compile the current kernel but installed it from CD-ROM from
a pre-release version some time ago and it may have undergone some 'dist-upgrades'.
I apt-installed 'alsa-modules-2.4.25-1-386' - which may be the problem. It was the nearest
version number at debian.org
/var/log/boot tells me
Sun Dec 21 17:18:07 2003: Starting ALSA (unknown version): failed - ALSA modules not installed
( 2003 ? I saw it today)
/usr is 100% full and after a number of application deletions this has not changed.
I created
Tux:/usr/src/linux/include/linux# ls config.h version.h
and found
Tux:/usr/src/modules/alsa-driver# make
make[1]: Entering directory `/usr/src/modules/alsa-driver/acore'
gcc -D__KERNEL__ -DMODULE=1 -I/usr/src/modules/alsa-driver/include -I/usr/src/l inux/include -O2 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -Wno-tr igraphs -O2 -fno-strict-aliasing -fno-common -pipe -DALSA_BUILD -nostdinc -iwith prefix include -DEXPORT_SYMTAB -c memalloc.c
In file included from memalloc.inc:2,
from memalloc.c:1:
/usr/src/linux/include/linux/version.h:1:1: too many decimal points in number
In file included from memalloc.inc:2,
from memalloc.c:1:
/usr/src/linux/include/linux/version.h:1: error: parse error before numeric cons tant
In file included from memalloc.c:1:
memalloc.inc:4:40: missing binary operator before token "("
and so on ...
I attach a few more diagnostics below.
Adam Bogacki, [EMAIL PROTECTED]
Tux:~# uname -a Linux Tux 2.4.18-bf2.4 #1 Sam M?r 30 00:56:06 CET 2002 i686 GNU/Linux
Tux:~# ls -l /dev/audio /dev/dsp0 /dev/mixer0 lrwxrwxrwx 1 root root 11 May 30 2003 /dev/audio -> /dev/audio0 crw-rw---- 1 root audio 14, 3 May 30 2003 /dev/dsp0 crw-rw---- 1 root audio 14, 0 May 30 2003 /dev/mixer0
Tux:~# dmesg
Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sam M?r 30 00:56:06 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 98288
zone(0): 4096 pages.
zone(1): 94192 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=345
Initializing CPU#0
Detected 731.477 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1461.45 BogoMIPS
Memory: 383704k/393152k available (1775k kernel code, 9060k reserved, 538k data, 260k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0387f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0387f9ff 00000000 00000000 00000000
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb170, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
PDC20268: IDE controller on PCI bus 00 dev 48
PCI: Found IRQ 5 for device 00:09.0
PDC20268: chipset revision 1
PDC20268: not 100% native mode: will probe irqs later
PDC20268: ROM enabled at 0xe9000000
PDC20268: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xb808-0xb80f, BIOS settings: hdg:pio, hdh:pio
hda: ST320423A, ATA DISK drive
hdb: WDC WD400BB-32AUA1, ATA DISK drive
hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 011, ATAPI CD/DVD-ROM drive
hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
hde: ST310212A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xa800-0xa807,0xac02 on irq 5
hda: 40011300 sectors (20486 MB) w/512KiB Cache, CHS=2490/255/63
hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63
hde: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdc: ATAPI DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
ide-floppy driver 0.97.sv
Partition check:
hda: hda1
hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 > hdb2
hde: [PTBL] [1245/255/63] hde1 hde2 < hde5 hde6 hde7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Mar 30 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c1652960
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 260k freed
Adding Swap: 939760k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,69), internal journal
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 01:11:10 Mar 30 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xa000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
hub.c: USB new device connect on bus1/1, assigned device number 2
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
PPP BSD Compression module registered
usb.c: USB device 2 (vend/prod 0x4b8/0x10c) is not claimed by any active driver.PPP Deflate Compression module registered
hub.c: USB new device connect on bus1/2, assigned device number 3
ip_conntrack (3071 buckets, 24568 max)
hub.c: USB hub found
hub.c: 4 ports detected
ip_tables: (C) 2000-2002 Netfilter core team
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
nbd: registered device at major 43
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
LVM version 1.0.1-rc4(ish)(03/10/2001) module loaded
md: multipath personality registered as nr 7
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
PCI: Found IRQ 11 for device 00:08.0
PCI: Sharing IRQ 11 with 00:0c.0
tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1.
eth0: Lite-On 82c168 PNIC rev 32 at 0xa400, 00:A0:CC:D9:E2:48, IRQ 11.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,66), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,73), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,70), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,71), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,72), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: Printer, EPSON Stylus Photo 700
lp0: using parport0 (polling).
usb_control/bulk_msg: timeout
es1371: version v0.30 time 01:10:39 Mar 30 2002
PCI: Found IRQ 11 for device 00:0c.0
PCI: Sharing IRQ 11 with 00:08.0
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0xc000 irq 11
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Tux:~#
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
