I'm trying to get the onboard S/PDIF output working on an Asus P4R800-VM
motherboard. According to the Asus documentation, I should be using the
snd-intel8x0 driver which I can compile fine without any problems.
However, when trying to load the snd-intel8x0 module, I get:
/lib/modules/2.4.22/kernel/sound/pci/snd-intel8x0.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.22/kernel/sound/pci/snd-intel8x0.o: insmod
/lib/modules/2.4.22/kernel/sound/pci/snd-intel8x0.o failed
/lib/modules/2.4.22/kernel/sound/pci/snd-intel8x0.o: insmod snd-intel8x0
failed
I have a sneaking suspicion that the problem could be something to do
with a slightly different hardware ID used on the P4R800-VM motherboard
(as opposed to the P4P800), although I don't know enough about these
things to be sure. I've tried both 0.9.8 and 1.0.0pre3 with the same
results.
Here is the output from dmesg when the module tries to load:
Intel ICH soundcard not found or device busy
...and from lspci for the hardware id:
pvr2:~# lspci
00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5833 (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5838
00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4347 (rev
01)
00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4348 (rev
01)
00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4345 (rev
01)
00:14.0 SMBus: ATI Technologies Inc: Unknown device 4353 (rev 17)
00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4349
00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 434c
00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4342
00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown
device 4341
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:08.0 Ethernet controller: 3Com Corporation: Unknown device 9202 (rev
40)
02:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device
5834
Any help with getting the S/PDIF working (or even the analogue!) would
be very much appreciated!
Cheers,
Kent
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
