Re: [Alsa-user] Yamaha YMF715, about the gabillionth try now

Billybob Sat, 18 Oct 2003 12:29:41 -0700

Ok, I attached a log of that information.

As for that "simple shell script", I could probably go quickly lookup how to write a script on Linux(I'm a programmer, but I'm a n00b to Linux) and make one that dumps all the required info, or I can code a program, but I'm sure people would prefer a script. Just say so if you want me to put the effort into it, I'd be glad to help.

Mark Constable wrote:

On Sat, 18 Oct 2003 11:35 am, Billybob wrote:

You went right over my head. I am a n00b, gimmie a break here.


He meant that you need to provide some system information
and real details about your problem otherwise no one has
any hope of helping you with your problem.


Open a shell and type "cat /proc/ioports", along with the
other suggestions, and paste the results into an email back
to this list.

Can we have anything useful, like /proc/ioports, /proc/interrupts,
/proc/bus/isapnp/devices, /proc/asound/cards, /proc/asound/devices,
lsmod, or perhaps some dmesg output?


FWIW to anyone, I've just rejoined this list after 6 months
and this was one of the first messages I clicked on... I am
stunned that there is still no simple shell based ALSA bug
reporting tool ?

Is anyone out there vaguely motivated enough to co-operate
on creating some simple shell script that complete newbies
(to linux) can use for diagnostics to this list ?

--markc



-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise 
Linux in the Boardroom; in the Front Office; & in the Server Room 
http://www.enterpriselinuxforum.com
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user

[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1000-100f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
  1000-1007 : ide0
  1008-100f : ide1
4000-40ff : PCI CardBus #14
4400-44ff : PCI CardBus #14
4800-48ff : PCI CardBus #15
4c00-4cff : PCI CardBus #15
fe00-fe3f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
fe60-fe7f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
ff80-ff9f : Toshiba America Info Systems FIR Port
ffe0-ffff : Intel Corp. 82371AB/EB/MB PIIX4 USB
  ffe0-ffff : usb-uhci
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ cat /proc/interrupts
           CPU0
  0:      36494          XT-PIC  timer
  1:        121          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          1          XT-PIC  rtc
 11:          7          XT-PIC  usb-uhci, Toshiba America Info Systems ToPIC97, 
Toshiba America Info Systems ToPIC97 (#2)
 12:       1006          XT-PIC  PS/2 Mouse
 14:       6970          XT-PIC  ide0
 15:        349          XT-PIC  ide1
NMI:          0
ERR:          0
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ cat /proc/bus/isapnp/devices
cat: /proc/bus/isapnp/devices: No such file or directory
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ cat /proc/asound/cards
cat: /proc/asound/cards: No such file or directory
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ cat /proc/asound/devices
cat: /proc/asound/devices: No such file or directory
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ lsmod
bash: lsmod: command not found
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ cat lsmod
cat: lsmod: No such file or directory
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ ca /lsmod
bash: ca: command not found
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ cat /lsmod
cat: /lsmod: No such file or directory
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ cat /proc/lsmod
cat: /proc/lsmod: No such file or directory
[EMAIL PROTECTED]&@@localhost [EMAIL PROTECTED]&@]$ dmesg
Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 
3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000009ff0000 (usable)
 BIOS-e820: 0000000009ff0000 - 000000000a000000 (ACPI data)
 BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
 BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
 BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
159MB LOWMEM available.
On node 0 totalpages: 40944
zone(0): 4096 pages.
zone(1): 36848 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 233.291 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 465.30 BogoMIPS
Memory: 156752k/163776k available (1347k kernel code, 5360k reserved, 999k data, 132k 
init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfedc7, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Found IRQ 11 for device 00:02.0
PCI: Sharing IRQ 11 with 00:0a.0
PCI: Found IRQ 11 for device 00:02.1
PCI: Sharing IRQ 11 with 00:07.2
PCI: Cannot allocate resource region 4 of device 00:07.1
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ 
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4006MAV, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 8007552 sectors (4100 MB), CHS=993/128/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:59:01 Mar 13 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:02.1
usb-uhci.c: USB UHCI at I/O 0xffe0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 193528k swap-space (priority -1)
Adding Swap: 327672k swap-space (priority -2)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:02.0
PCI: Sharing IRQ 11 with 00:0a.0
PCI: Found IRQ 11 for device 00:02.1
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0498, PCI irq11
Socket status: 30000011
Yenta IRQ list 0498, PCI irq11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 
0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
ttyS1 at port 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
ide-floppy driver 0.99.newide
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12

Re: [Alsa-user] Yamaha YMF715, about the gabillionth try now

Reply via email to