At Wed, 10 Sep 2003 10:01:21 +0100, Ben Tisdall wrote: > > I use two cards on my system, opl3sa2 & cs4281 and recently upgraded from > 0.9.0rc2 to 0.9.6 > > Although both drivers load fine at boot time, if I restart Alsa, opl3sa2 > fails to load: > > jitter:/home/bentis# Starting sound driver: snd-opl3sa2 > /lib/modules/2.4.21/kernel/sound/isa/snd-opl3sa2.o: init_module: No such > device > Hint: insmod errors can be caused by incorrect module parameters, including > invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg > jitter:/home/bentis# Hint: insmod errors can be caused by incorrect module > parameters, including invalid IO or IRQ parameters. > /lib/modules/2.4.21/kernel/sound/isa/snd-opl3sa2.o: insmod > /lib/modules/2.4.21/kernel/sound/isa/snd-opl3sa2.o failed > /lib/modules/2.4.21/kernel/sound/isa/snd-opl3sa2.o: insmod snd-opl3sa2 > failed > Starting sound driver: snd-cs4281 done > > dmesg shows this: > > ALSA ../alsa-kernel/isa/opl3sa2.c:667: PnP configure failure (out of > resources?) err = -16 > ALSA ../alsa-kernel/isa/opl3sa2.c:904: Yamaha OPL3-SA soundcard not found or > device busy > > Any ideas?
it's a bug of pnp wrapper module. already fixed on the cvs. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
