Hi!
I've got this card (Anubis Typhoon):
[CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6
C-Media PCI CMI8738-MC6 (model 55) at 0xd400, irq 10
and i'm using alsa 0.9.6.
I want to record something via mic-in using DAP for example. When I tried it
the first time, i could only record a very low signal (although the signal
was monitored clean and loud to the speakers). Then I turned off the
"mic-to-center" switch as described at alsa-project.org. Now the recorded
signal was higher, but still to low to work properly with it. What's wrong?
Mic-capture is on, all mic-channels are set to max and mic-boost is on. Is
this a general problem with this card/driver?
(recording via line-in doesen't work at all, but that's not so bad because I
only want to record guitar/microphone. CD recording works fine.)
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
