The specs for my VXPocket V2 state that the maximum input line level is +10dBu (+8dBV). I would like to design/select a pre-amp that generates an appropriate "line level" signal. Some messages have indicated that I will need to use an XLR pad to adjust the level.
Can someone point me to a reference that explains how to convert dBu/dBV specifications into "volts" that I can see on my oscilliscope ? Also, I'm not quite sure I understand what I need to do to generate a "balanced" signal for the XLR input (3 pins). Seems like I need to run a "standard" waveform into a transformer with a center tap for "ground". If so, what impedance transformer should I use ? Thanks, Scott. ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
