On Thu, 2003-07-17 at 12:24, Daniel Hawthorn wrote: > You need to do "alsactl restore" once you've rebooted to reload the > levels. You'll need to put this in your init scripts to do it > automatically. How you do this exactly depends on your distro - if you > need more help on this, please respond with what distro of linux you are > using. > > -Daniel > > Justin Zygmont wrote: > > I was just hoping someone might know what more it takes to get sound to > > come back after reboots. I used alsamixer to unmute sound, which worked, > > then when I run 'alsactl store' it saved the settings to the > > /etc/asound.state file, but the card remains muted after a reboot. > > > > thanks.. > >
I've been doing lots of loading and unloading of sound modules recently, trying to get my via8233 to sound like it should. The solution I've just come up with for storing and restoring sound levels has been to actually add calls to alsactl from /etc/modules.conf, whenever the soundcard driver is loaded or unloaded, like: post-install snd-via82xx /usr/sbin/alsactl restore pre-remove snd-via82xx /usr/sbin/alsactl store If anyone knows why I shouldn't be doing this (I'm not a huge expert on modules and they're care and feeding), I'd love to hear it. But I've found this to be more helpful than loading on boot. Just my 2 cents, Scotty -- Haiku's inventor must have had seven fingers on his middle hand ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
