I have checked my install. I have installed from both RedHat RPMs and
built from tarballs, I have tried kernels 2.4.18-14 and -24. I also
installed -26 for kicks and wouldhave used a 2.5 exerimental kernel had
my RedHat system been able to compile it. I have the appropriate models
and asound files. I think /etc/init.d/alsasound is correct too.
However no mater how I chmod or chown, I cannot use /dev/dsp. Also I
tried creating a group called audio in the redhat group/user manager.
However with no way to point this a the sound stuff it is useless.
Any thoughts? (No, I don't have time to use a different distro - I'm a
physcics student)
Thanks.
On Sun, 2003-03-09 at 15:48, tod wrote:
> Yes, I think so. below is my (huge) install in its completeness
>
> thanks, todd
>
> On Sun, 9 Mar 2003, [iso-8859-1] Søren Bovbjerg wrote:
>
> > Date: Sun, 9 Mar 2003 17:27:29 +0100
> > From: "[iso-8859-1] Søren Bovbjerg" <[EMAIL PROTECTED]>
> > To: tod <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
> > Subject: Re: Similar Problem (was) Re: [Alsa-user] Problem,
> > No /dev/dsp found for i810 nor Quattro
> >
> > Did you run ./snddevices in the driver directory after compiling and
> > installing the driver?
> > This creates the OSS devices in /dev. It is explained in the top level
> > README file in the driver package (I think... - I am not on an Alsa machine
> > right now).
> >
> > HTH
> > Soeren
> >
> >
> > > ---------- Forwarded message ----------
> > > Date: 08 Mar 2003 16:47:28 -0500
> > > From: Alexandra Curtin <[EMAIL PROTECTED]>
> > > To: tod <[EMAIL PROTECTED]>
> > > Subject: Re: [Alsa-user] Problems, No /dev/dsp found for i810 nor Quattro
> > >
> > > I am having the same problem with the ALSA ice-1712 drivers on RH 8.0
> > > for my terratec (a 10 channel breakout box slightly similar to the
> > > quattro by midiman)
> > >
> > > general help on this would be great.
> > > the documentation on rh site is out of date, dealing only with alsa 0.3
> > > versions
> > >
> > > On Sat, 2003-03-08 at 15:58, tod wrote:
> > > > In my never ending saga of difficulties with ALSA, here is some info as
> > to
> > > > what is going wrong.
> > > >
> > > > Whenever KDE starts it gives me a message that /dev/dsp doesn`t exist.
> > > > This happens in root & my local usr. I can open and run a bunch of sound
> > > > programs, all of which act as if they were playing sound or processing
> > > > sound, but no sound comes out of either my internal intel i810 sound
> > card
> > > > (desknote laptop running redhat 7.3), nor my M-Audio Quattro (which is
> > > > what I am trying to get running). Below is some info, my modules.conf
> > > > file, and other stuff for your knowledge to register :)
> >
> >
> >
>
>
> [EMAIL PROTECTED] alsa-driver-0.9.0rc7]# ./configure --with-cards=usb-audio
> --with
> -cards=intel8x0 --with-sequencer=yes;make;make install
> checking for gcc... gcc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for ranlib... ranlib
> checking for a BSD compatible install... /usr/bin/install -c
> checking how to run the C preprocessor... gcc -E
> checking for ANSI C header files... yes
> checking for gcc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking whether time.h and sys/time.h may both be included... yes
> checking whether gcc needs -traditional... no
> checking for current directory... /usr/src/alsa/alsa-driver-0.9.0rc7
> checking cross compile...
> checking for directory with kernel source...
> /lib/modules/2.4.18-3BOOT/build
> checking for kernel version... 2.4.18-3
> checking for kenrel linux/pm.h... "yes"
> checking for kenrel linux/spinlock.h... "yes"
> checking for kenrel linux/irq.h... "yes"
> Removing a dummy linux/irq.h.
> checking for kenrel linux/threads.h... "yes"
> Removing a dummy linux/threads.h.
> checking for kenrel linux/rwsem.h... "yes"
> Removing a dummy linux/rwsem.h.
> checking for kenrel linux/gameport.h... "yes"
> Removing a dummy linux/gameport.h.
> checking for kenrel linux/devfs_fs_kernel.h... "yes"
> checking for kenrel linux/workqueue.h... "no"
> checking for kernel module symbol versions... "yes"
> checking for PCI support in kernel... "yes"
> checking for SGI/MIPS (HAL2) architecture... "no"
> checking for directory to store kernel modules...
> /lib/modules/2.4.18-3/kernel/s
> ound
> checking for verbose printk... on
> checking for debug level... none
> checking for ISA support in kernel... "yes"
> checking for processor type... i686
> checking for SMP... "no"
> checking for ISA PnP driver in kernel... yes
> checking for ISA PnP support... yes
> Removing local linux/isapnp.h.
> checking for driver version... 0.9.0rc7
> checking for sequencer support... yes
> checking for OSS/Free emulation... yes
> checking for RTC callback support in kernel... "no"
> checking for USB support... "no"
> checking for USB module support... "yes"
> checking for kernel PCMCIA
> checking for PCMCIA support... "no"
> checking for PCMCIA module support... "yes"
> checking for PC9800 support in kernel... "no"
> checking for which soundcards to compile driver for... intel8x0
> configure: creating ./config.status
> config.status: creating version
> config.status: creating Makefile.conf
> config.status: creating snddevices
> config.status: creating utils/alsa-driver.spec
> config.status: creating utils/buildrpm
> config.status: creating toplevel.config
> config.status: creating include/config.h
> config.status: creating include/config1.h
> config.status: creating include/version.h
> config.status: include/version.h is unchanged
> make[1]: Entering directory `/usr/src/alsa/alsa-driver-0.9.0rc7/acore'
> make[1]: *** No rule to make target
> `/lib/modules/2.4.18-3/build/include/linux/c
> onfig.h', needed by `pcm.o'. Stop.
> make[1]: Leaving directory `/usr/src/alsa/alsa-driver-0.9.0rc7/acore'
> make: *** [compile] Error 1
> make[1]: Entering directory `/usr/src/alsa/alsa-driver-0.9.0rc7/acore'
> make[1]: *** No rule to make target
> `/lib/modules/2.4.18-3/build/include/linux/c
> onfig.h', needed by `pcm.o'. Stop.
> make[1]: Leaving directory `/usr/src/alsa/alsa-driver-0.9.0rc7/acore'
> make: *** [compile] Error 1
> [EMAIL PROTECTED] alsa-driver-0.9.0rc7]# chmod a+rw /dev/dsp /dev/mixer
> /dev/sequ
> encer /dev/midi
> [EMAIL PROTECTED] alsa-driver-0.9.0rc7]# cd /usr/src/alsa/alsa-lib-0.9.0rc7
> [EMAIL PROTECTED] alsa-lib-0.9.0rc7]# ./configure;make;make install
> checking build system type... i686-pc-linux-gnu
> checking host system type... i686-pc-linux-gnu
> checking target system type... i686-pc-linux-gnu
> checking for a BSD compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for mawk... no
> checking for gawk... gawk
> checking whether make sets ${MAKE}... yes
> checking for gcc... gcc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for style of include used by make... GNU
> checking dependency style of gcc... gcc3
> checking for a BSD compatible install... /usr/bin/install -c
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for /usr/bin/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking how to run the C preprocessor... gcc -E
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for gcc option to produce PIC... -fPIC
> checking if gcc PIC flag -fPIC works... yes
> checking if gcc static flag -static works... yes
> checking if gcc supports -c -o file.o... yes
> checking if gcc supports -c -o file.lo... yes
> checking if gcc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/bin/ld) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking for shl_load... no
> checking for shl_load in -ldld... no
> checking for dlopen... no
> checking for dlopen in -ldl... yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... no
> checking whether -lc should be explicitly linked in... no
> creating libtool
> checking for ANSI C header files... yes
> checking for gcc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking whether time.h and sys/time.h may both be included... yes
> checking whether gcc needs -traditional... no
> checking for hsearch_r... yes
> checking for library version... major 0 minor 9 subminor 0 extrastr rc
> extraver
> 100007
> checking for versioned symbols... yes
> checking for debug... yes
> checking for softfloat... no
> checking for architecture... x86
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating doc/Makefile
> config.status: creating doc/pictures/Makefile
> config.status: creating include/Makefile
> config.status: creating include/sound/Makefile
> config.status: creating src/Makefile
> config.status: creating src/control/Makefile
> config.status: creating src/mixer/Makefile
> config.status: creating src/pcm/Makefile
> config.status: creating src/rawmidi/Makefile
> config.status: creating src/timer/Makefile
> config.status: creating src/hwdep/Makefile
> config.status: creating src/seq/Makefile
> config.status: creating src/instr/Makefile
> config.status: creating src/compat/Makefile
> config.status: creating src/conf/Makefile
> config.status: creating src/conf/cards/Makefile
> config.status: creating src/conf/pcm/Makefile
> config.status: creating aserver/Makefile
> config.status: creating test/Makefile
> config.status: creating utils/Makefile
> config.status: creating utils/alsa-lib.spec
> config.status: creating utils/alsa.pc
> config.status: creating include/config.h
> config.status: include/config.h is unchanged
> Making all in doc
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> Making all in pictures
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc/pictures'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc/pictures'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> make[2]: Nothing to be done for `all-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> Making all in include
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> cd .. \
> && CONFIG_FILES= CONFIG_HEADERS=include/config.h \
> /bin/sh ./config.status
> config.status: creating include/config.h
> config.status: include/config.h is unchanged
> make all-recursive
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> Making all in sound
> make[3]: Entering directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/include/sound'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include/sound'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> Making all in src
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> Making all in control
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/control'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/control'
> Making all in mixer
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/mixer'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/mixer'
> Making all in pcm
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/pcm'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/pcm'
> Making all in rawmidi
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/rawmidi'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/rawmidi'
> Making all in timer
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/timer'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/timer'
> Making all in hwdep
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/hwdep'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/hwdep'
> Making all in seq
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/seq'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/seq'
> Making all in instr
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/instr'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/instr'
> Making all in compat
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/compat'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/compat'
> Making all in conf
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> Making all in cards
> make[3]: Entering directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/cards'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/cards'
> Making all in pcm
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/pcm'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/pcm'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> make[3]: Nothing to be done for `all-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> make[2]: Nothing to be done for `all-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> Making all in aserver
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/aserver'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/aserver'
> Making all in test
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/test'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/test'
> Making all in utils
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/utils'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/utils'
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7'
> make[1]: Nothing to be done for `all-am'.
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7'
> Making install in doc
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> Making install in pictures
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc/pictures'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc/pictures'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc/pictures'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc/pictures'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/doc'
> Making install in include
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> Making install in sound
> make[2]: Entering directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/include/sound'
> make[3]: Entering directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/include/sound'
> make[3]: Nothing to be done for `install-exec-am'.
> /bin/sh ../../mkinstalldirs /usr/include/alsa/sound
> /usr/bin/install -c -m 644 ainstr_fm.h
> /usr/include/alsa/sound/ainstr_fm.h
> /usr/bin/install -c -m 644 ainstr_gf1.h
> /usr/include/alsa/sound/ainstr_gf1.h
> /usr/bin/install -c -m 644 ainstr_simple.h
> /usr/include/alsa/sound/ainstr_simpl
> e.h
> /usr/bin/install -c -m 644 ainstr_iw.h
> /usr/include/alsa/sound/ainstr_iw.h
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include/sound'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include/sound'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> make[3]: Nothing to be done for `install-exec-am'.
> /bin/sh ../mkinstalldirs /usr/include/alsa
> /usr/bin/install -c -m 644 asoundlib.h /usr/include/alsa/asoundlib.h
> /usr/bin/install -c -m 644 asoundef.h /usr/include/alsa/asoundef.h
> /usr/bin/install -c -m 644 version.h /usr/include/alsa/version.h
> /usr/bin/install -c -m 644 global.h /usr/include/alsa/global.h
> /usr/bin/install -c -m 644 input.h /usr/include/alsa/input.h
> /usr/bin/install -c -m 644 output.h /usr/include/alsa/output.h
> /usr/bin/install -c -m 644 error.h /usr/include/alsa/error.h
> /usr/bin/install -c -m 644 conf.h /usr/include/alsa/conf.h
> /usr/bin/install -c -m 644 pcm.h /usr/include/alsa/pcm.h
> /usr/bin/install -c -m 644 pcm_plugin.h /usr/include/alsa/pcm_plugin.h
> /usr/bin/install -c -m 644 rawmidi.h /usr/include/alsa/rawmidi.h
> /usr/bin/install -c -m 644 timer.h /usr/include/alsa/timer.h
> /usr/bin/install -c -m 644 hwdep.h /usr/include/alsa/hwdep.h
> /usr/bin/install -c -m 644 control.h /usr/include/alsa/control.h
> /usr/bin/install -c -m 644 mixer.h /usr/include/alsa/mixer.h
> /usr/bin/install -c -m 644 seq_event.h /usr/include/alsa/seq_event.h
> /usr/bin/install -c -m 644 seq.h /usr/include/alsa/seq.h
> /usr/bin/install -c -m 644 seqmid.h /usr/include/alsa/seqmid.h
> /usr/bin/install -c -m 644 seq_midi_event.h
> /usr/include/alsa/seq_midi_event.h
> /usr/bin/install -c -m 644 conv.h /usr/include/alsa/conv.h
> /usr/bin/install -c -m 644 instr.h /usr/include/alsa/instr.h
> /usr/bin/install -c -m 644 iatomic.h /usr/include/alsa/iatomic.h
> make install-data-hook
> make[4]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> test -d /usr/include/sys || mkdir -p /usr/include/sys
> /usr/bin/install -c -m 644 sys.h /usr/include/sys/asoundlib.h
> make[4]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/include'
> Making install in src
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> Making install in control
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/control'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/control'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/control'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/control'
> Making install in mixer
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/mixer'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/mixer'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/mixer'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/mixer'
> Making install in pcm
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/pcm'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/pcm'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/pcm'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/pcm'
> Making install in rawmidi
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/rawmidi'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/rawmidi'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/rawmidi'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/rawmidi'
> Making install in timer
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/timer'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/timer'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/timer'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/timer'
> Making install in hwdep
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/hwdep'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/hwdep'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/hwdep'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/hwdep'
> Making install in seq
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/seq'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/seq'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/seq'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/seq'
> Making install in instr
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/instr'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/instr'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/instr'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/instr'
> Making install in compat
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/compat'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/compat'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/compat'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/compat'
> Making install in conf
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> Making install in cards
> make[3]: Entering directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/cards'
> make[4]: Entering directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/cards'
> make[4]: Nothing to be done for `install-exec-am'.
> /bin/sh ../../../mkinstalldirs /usr/share/alsa/cards
> /usr/bin/install -c -m 644 aliases.conf
> /usr/share/alsa/cards/aliases.conf
> /usr/bin/install -c -m 644 Audigy.conf /usr/share/alsa/cards/Audigy.conf
> /usr/bin/install -c -m 644 CMI8338.conf
> /usr/share/alsa/cards/CMI8338.conf
> /usr/bin/install -c -m 644 CMI8738-MC6.conf
> /usr/share/alsa/cards/CMI8738-MC6.c
> onf
> /usr/bin/install -c -m 644 CS46xx.conf /usr/share/alsa/cards/CS46xx.conf
> /usr/bin/install -c -m 644 EMU10K1.conf
> /usr/share/alsa/cards/EMU10K1.conf
> /usr/bin/install -c -m 644 ENS1370.conf
> /usr/share/alsa/cards/ENS1370.conf
> /usr/bin/install -c -m 644 ENS1371.conf
> /usr/share/alsa/cards/ENS1371.conf
> /usr/bin/install -c -m 644 FM801.conf /usr/share/alsa/cards/FM801.conf
> /usr/bin/install -c -m 644 GUS.conf /usr/share/alsa/cards/GUS.conf
> /usr/bin/install -c -m 644 ICE1712.conf
> /usr/share/alsa/cards/ICE1712.conf
> /usr/bin/install -c -m 644 ICE1724.conf
> /usr/share/alsa/cards/ICE1724.conf
> /usr/bin/install -c -m 644 ICH.conf /usr/share/alsa/cards/ICH.conf
> /usr/bin/install -c -m 644 RME9636.conf
> /usr/share/alsa/cards/RME9636.conf
> /usr/bin/install -c -m 644 RME9652.conf
> /usr/share/alsa/cards/RME9652.conf
> /usr/bin/install -c -m 644 SI7018.conf /usr/share/alsa/cards/SI7018.conf
> /usr/bin/install -c -m 644 TRID4DWAVENX.conf
> /usr/share/alsa/cards/TRID4DWAVENX
> .conf
> /usr/bin/install -c -m 644 YMF744.conf /usr/share/alsa/cards/YMF744.conf
> /usr/bin/install -c -m 644 VIA8233.conf
> /usr/share/alsa/cards/VIA8233.conf
> /usr/bin/install -c -m 644 VIA8233A.conf
> /usr/share/alsa/cards/VIA8233A.conf
> make[4]: Leaving directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/cards'
> make[3]: Leaving directory
> `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/cards'
> Making install in pcm
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/pcm'
> make[4]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/pcm'
> make[4]: Nothing to be done for `install-exec-am'.
> /bin/sh ../../../mkinstalldirs /usr/share/alsa/pcm
> /usr/bin/install -c -m 644 front.conf /usr/share/alsa/pcm/front.conf
> /usr/bin/install -c -m 644 rear.conf /usr/share/alsa/pcm/rear.conf
> /usr/bin/install -c -m 644 center_lfe.conf
> /usr/share/alsa/pcm/center_lfe.conf
> /usr/bin/install -c -m 644 surround40.conf
> /usr/share/alsa/pcm/surround40.conf
> /usr/bin/install -c -m 644 surround51.conf
> /usr/share/alsa/pcm/surround51.conf
> /usr/bin/install -c -m 644 iec958.conf /usr/share/alsa/pcm/iec958.conf
> make[4]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/pcm'
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf/pcm'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> make[4]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> make[4]: Nothing to be done for `install-exec-am'.
> /bin/sh ../../mkinstalldirs /usr/share/alsa
> /usr/bin/install -c -m 644 alsa.conf /usr/share/alsa/alsa.conf
> make[4]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src/conf'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> make[3]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> /bin/sh ../mkinstalldirs /usr/lib
> /bin/sh ../libtool --mode=install /usr/bin/install -c libasound.la
> /usr/lib/li
> basound.la
> /usr/bin/install -c .libs/libasound.so.2.0.0 /usr/lib/libasound.so.2.0.0
> (cd /usr/lib && rm -f libasound.so.2 && ln -s libasound.so.2.0.0
> libasound.so.2)
> (cd /usr/lib && rm -f libasound.so && ln -s libasound.so.2.0.0
> libasound.so)
> /usr/bin/install -c .libs/libasound.lai /usr/lib/libasound.la
> PATH="$PATH:/sbin" ldconfig -n /usr/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
> /usr/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/src'
> Making install in aserver
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/aserver'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/aserver'
> /bin/sh ../mkinstalldirs /usr/bin
> /bin/sh ../libtool --mode=install /usr/bin/install -c aserver
> /usr/bin/aserver
> /usr/bin/install -c .libs/aserver /usr/bin/aserver
> make[2]: Nothing to be done for `install-data-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/aserver'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/aserver'
> Making install in test
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/test'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/test'
> make[2]: Nothing to be done for `install-exec-am'.
> make[2]: Nothing to be done for `install-data-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/test'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/test'
> Making install in utils
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/utils'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7/utils'
> make[2]: Nothing to be done for `install-exec-am'.
> /bin/sh ../mkinstalldirs /usr/share/aclocal
> /usr/bin/install -c -m 644 alsa.m4 /usr/share/aclocal/alsa.m4
> /bin/sh ../mkinstalldirs /usr/lib/pkgconfig
> /usr/bin/install -c -m 644 alsa.pc /usr/lib/pkgconfig/alsa.pc
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/utils'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7/utils'
> make[1]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7'
> make[2]: Entering directory `/usr/src/alsa/alsa-lib-0.9.0rc7'
> make[2]: Nothing to be done for `install-exec-am'.
> make[2]: Nothing to be done for `install-data-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7'
> make[1]: Leaving directory `/usr/src/alsa/alsa-lib-0.9.0rc7'
> [EMAIL PROTECTED] alsa-lib-0.9.0rc7]# cd /usr/src/alsa/alsa-utils-0.9.0rc7
> [EMAIL PROTECTED] alsa-utils-0.9.0rc7]# ./configure;make;make install
> checking for a BSD compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for mawk... no
> checking for gawk... gawk
> checking whether make sets ${MAKE}... yes
> checking for gcc... gcc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for style of include used by make... GNU
> checking dependency style of gcc... gcc3
> checking for a BSD compatible install... /usr/bin/install -c
> checking whether ln -s works... yes
> checking for ALSA CFLAGS...
> checking for ALSA LDFLAGS... -lasound -lm -ldl -lpthread
> checking for libasound headers version >= 0.9.0... found.
> checking for snd_ctl_open in -lasound... yes
> checking how to run the C preprocessor... gcc -E
> checking for ANSI C header files... yes
> checking for initscr in -lncurses... yes
> checking for gcc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking whether time.h and sys/time.h may both be included... yes
> checking whether gcc needs -traditional... no
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating alsactl/Makefile
> config.status: creating alsamixer/Makefile
> config.status: creating amixer/Makefile
> config.status: creating aplay/Makefile
> config.status: creating include/Makefile
> config.status: creating utils/Makefile
> config.status: creating utils/alsa-utils.spec
> config.status: creating seq/Makefile
> config.status: creating seq/aconnect/Makefile
> config.status: creating seq/aseqnet/Makefile
> config.status: creating include/aconfig.h
> config.status: include/aconfig.h is unchanged
> Making all in include
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/include'
> cd .. \
> && CONFIG_FILES= CONFIG_HEADERS=include/aconfig.h \
> /bin/sh ./config.status
> config.status: creating include/aconfig.h
> config.status: include/aconfig.h is unchanged
> make all-am
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/include'
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/include'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/include'
> Making all in alsactl
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsactl'
> source='alsactl.c' object='alsactl.o' libtool=no \
> depfile='.deps/alsactl.Po' tmpdepfile='.deps/alsactl.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../include -g -O2 -c `test -f alsactl.c
> || ech
> o './'`alsactl.c
> gcc -g -O2 -o alsactl alsactl.o -lasound -lm -ldl -lpthread
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsactl'
> Making all in alsamixer
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsamixer'
> source='alsamixer.c' object='alsamixer.o' libtool=no \
> depfile='.deps/alsamixer.Po' tmpdepfile='.deps/alsamixer.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../include -g -O2 -c `test -f
> alsamixer.c || e
> cho './'`alsamixer.c
> gcc -g -O2 -o alsamixer alsamixer.o -lncurses -lasound -lm -ldl
> -lpthread
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsamixer'
> Making all in amixer
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/amixer'
> source='amixer.c' object='amixer.o' libtool=no \
> depfile='.deps/amixer.Po' tmpdepfile='.deps/amixer.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -c `test
> -f amix
> er.c || echo './'`amixer.c
> gcc -g -O2 -o amixer amixer.o -lm -lasound -lm -ldl -lpthread
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/amixer'
> Making all in aplay
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> source='aplay.c' object='aplay.o' libtool=no \
> depfile='.deps/aplay.Po' tmpdepfile='.deps/aplay.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -g -O2 -c `test
> -f apla
> y.c || echo './'`aplay.c
> gcc -g -O2 -o aplay aplay.o -lasound -lasound -lm -ldl -lpthread
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> Making all in seq
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> Making all in aconnect
> make[2]: Entering directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aconnect'
> source='aconnect.c' object='aconnect.o' libtool=no \
> depfile='.deps/aconnect.Po' tmpdepfile='.deps/aconnect.TPo' \
> depmode=gcc3 /bin/sh ../../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -c
> `test -
> f aconnect.c || echo './'`aconnect.c
> gcc -g -O2 -o aconnect aconnect.o -lasound -lm -ldl -lpthread
> make[2]: Leaving directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aconnect'
> Making all in aseqnet
> make[2]: Entering directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aseqnet'
> source='aseqnet.c' object='aseqnet.o' libtool=no \
> depfile='.deps/aseqnet.Po' tmpdepfile='.deps/aseqnet.TPo' \
> depmode=gcc3 /bin/sh ../../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -c
> `test -
> f aseqnet.c || echo './'`aseqnet.c
> gcc -g -O2 -o aseqnet aseqnet.o -lasound -lm -ldl -lpthread
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aseqnet'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> make[2]: Nothing to be done for `all-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> Making all in utils
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/utils'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/utils'
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7'
> make[1]: Nothing to be done for `all-am'.
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7'
> Making install in include
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/include'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/include'
> make[2]: Nothing to be done for `install-exec-am'.
> make[2]: Nothing to be done for `install-data-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/include'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/include'
> Making install in alsactl
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsactl'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsactl'
> /bin/sh ../mkinstalldirs /usr/sbin
> /usr/bin/install -c alsactl /usr/sbin/alsactl
> /bin/sh ../mkinstalldirs /usr/man/man1
> /usr/bin/install -c -m 644 ./alsactl.1 /usr/man/man1/alsactl.1
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsactl'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsactl'
> Making install in alsamixer
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsamixer'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsamixer'
> /bin/sh ../mkinstalldirs /usr/bin
> /usr/bin/install -c alsamixer /usr/bin/alsamixer
> /bin/sh ../mkinstalldirs /usr/man/man1
> /usr/bin/install -c -m 644 ./alsamixer.1 /usr/man/man1/alsamixer.1
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsamixer'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/alsamixer'
> Making install in amixer
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/amixer'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/amixer'
> /bin/sh ../mkinstalldirs /usr/bin
> /usr/bin/install -c amixer /usr/bin/amixer
> /bin/sh ../mkinstalldirs /usr/man/man1
> /usr/bin/install -c -m 644 ./amixer.1 /usr/man/man1/amixer.1
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/amixer'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/amixer'
> Making install in aplay
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> /bin/sh ../mkinstalldirs /usr/bin
> /usr/bin/install -c aplay /usr/bin/aplay
> make install-exec-hook
> make[3]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> rm -f /usr/bin/arecord
> (cd /usr/bin && ln -s aplay arecord)
> make[3]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> /bin/sh ../mkinstalldirs /usr/man/man1
> /usr/bin/install -c -m 644 ./aplay.1 /usr/man/man1/aplay.1
> /usr/bin/install -c -m 644 ./arecord.1 /usr/man/man1/arecord.1
> make install-data-hook
> make[3]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> rm -f /usr/man/man1/arecord.1
> (cd /usr/man/man1 && ln -s aplay.1 arecord.1)
> make[3]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/aplay'
> Making install in seq
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> Making install in aconnect
> make[2]: Entering directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aconnect'
> make[3]: Entering directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aconnect'
> /bin/sh ../../mkinstalldirs /usr/bin
> /usr/bin/install -c aconnect /usr/bin/aconnect
> /bin/sh ../../mkinstalldirs /usr/man/man1
> /usr/bin/install -c -m 644 ./aconnect.1 /usr/man/man1/aconnect.1
> make[3]: Leaving directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aconnect'
> make[2]: Leaving directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aconnect'
> Making install in aseqnet
> make[2]: Entering directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aseqnet'
> make[3]: Entering directory
> `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aseqnet'
> /bin/sh ../../mkinstalldirs /usr/bin
> /usr/bin/install -c aseqnet /usr/bin/aseqnet
> /bin/sh ../../mkinstalldirs /usr/man/man1
> /usr/bin/install -c -m 644 ./aseqnet.1 /usr/man/man1/aseqnet.1
> make[3]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aseqnet'
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq/aseqnet'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> make[3]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/seq'
> Making install in utils
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/utils'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7/utils'
> make[2]: Nothing to be done for `install-exec-am'.
> make[2]: Nothing to be done for `install-data-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/utils'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7/utils'
> make[1]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7'
> make[2]: Entering directory `/usr/src/alsa/alsa-utils-0.9.0rc7'
> make[2]: Nothing to be done for `install-exec-am'.
> make[2]: Nothing to be done for `install-data-am'.
> make[2]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7'
> make[1]: Leaving directory `/usr/src/alsa/alsa-utils-0.9.0rc7'
> [EMAIL PROTECTED] alsa-utils-0.9.0rc7]# modprobe snd-intel8x0;modprobe
> snd-pcm-os
> s;modprobe snd-mixer-oss;modprobe snd-seq-oss
> modprobe: Can't locate module snd-intel8x0
> modprobe: Can't locate module snd-pcm-oss
> modprobe: Can't locate module snd-mixer-oss
> modprobe: Can't locate module snd-seq-oss
> [EMAIL PROTECTED] alsa-utils-0.9.0rc7]# modprobe snd-usb-audio;modprobe
> snd-pcm-o
> ss;modprobe snd-mixer-oss;modprobe snd-seq-oss
> modprobe: Can't locate module snd-usb-audio
> modprobe: Can't locate module snd-pcm-oss
> modprobe: Can't locate module snd-mixer-oss
> modprobe: Can't locate module snd-seq-oss
> [EMAIL PROTECTED] alsa-utils-0.9.0rc7]# cd
> /usr/src/alsa/alsa-driver-0.9.0rc7
> [EMAIL PROTECTED] alsa-driver-0.9.0rc7]# ./snddevices
> Creating /dev/mixer?... done
> Creating /dev/sequencer... done
> Creating /dev/midi?... done
> Creating /dev/dsp?... done
> Creating /dev/audio?... done
> Creating /dev/sndstat... done
> Creating /dev/music... done
> Creating /dev/dmmidi?... done
> Creating /dev/dmfm?... done
> Creating /dev/amixer?... done
> Creating /dev/adsp?... done
> Creating /dev/amidi?... done
> Creating /dev/admmidi?... done
> create symbolic link `/dev/mixer' to `/dev/mixer0'
> create symbolic link `/dev/midi' to `/dev/midi0'
> create symbolic link `/dev/dsp' to `/dev/dsp0'
> create symbolic link `/dev/audio' to `/dev/audio0'
> create symbolic link `/dev/sequencer2' to `/dev/music'
> create symbolic link `/dev/adsp' to `/dev/adsp0'
> create symbolic link `/dev/amidi' to `/dev/amidi0'
> ALSA dynamic sound device filesystem
> create symbolic link `/dev/snd' to `/proc/asound/dev'
> ALSA loader devices
> Creating /dev/aload?... done
> Creating /dev/aloadSEQ... done
> [EMAIL PROTECTED] alsa-driver-0.9.0rc7]# modprobe snd-usb-audio;modprobe
> snd-inte
> l8x0;modprobe snd-pcm-oss;modprobe snd-mixer-oss;modprobe snd-seq-oss
> modprobe: Can't locate module snd-usb-audio
> modprobe: Can't locate module snd-intel8x0
> modprobe: Can't locate module snd-pcm-oss
> modprobe: Can't locate module snd-mixer-oss
> modprobe: Can't locate module snd-seq-oss
> [EMAIL PROTECTED] alsa-driver-0.9.0rc7]# modprobe snd-card-usb-audio
> modprobe: Can't locate module snd-card-usb-audio
> [EMAIL PROTECTED] alsa-driver-0.9.0rc7]# alsamixer
>
> alsamixer: function snd_ctl_open failed for default: No such file or
> directory
> [EMAIL PROTECTED] alsa-driver-0.9.0rc7]#
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger
> for complex code. Debugging C/C++ programs can leave you feeling lost and
> disoriented. TotalView can help you find your way. Available on major UNIX
> and Linux platforms. Try it free. www.etnus.com
> _______________________________________________
> Alsa-user mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/alsa-user
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger
for complex code. Debugging C/C++ programs can leave you feeling lost and
disoriented. TotalView can help you find your way. Available on major UNIX
and Linux platforms. Try it free. www.etnus.com
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
