Hello,
I am using alsa-driver-0.9.0rc7 on a 2.2.23 kernel and I am trying to
install a Terratec EWX 24/96 card. I can successfully load the driver
(ice1712) and I can use envy24control to modify some settings,
but aplay (or arecord) refuses to access the card.
I get either one of the following two errors:
> aplay -D hw:1 sm.wav
Playing WAVE 'sm.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: set_params:787: Sample format non available
> aplay -D plug:hw:1 sm.wav
Playing WAVE 'sm.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
ALSA lib pcm_hw.c:297:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS
failed: Cannot allocate memory
aplay: set_params:815: Unable to install hw params:
ACCESS: RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 32
CHANNELS: 2
RATE: 44100
PERIOD_TIME: (37142 37143)
PERIOD_SIZE: 1638
PERIOD_BYTES: 6552
PERIODS: (4 5)
BUFFER_TIME: (148594 148595)
BUFFER_SIZE: 6553
BUFFER_BYTES: 26212
TICK_TIME: 10000
There are two cards in my machine
> cat /proc/asound/cards
0 [Solo1 ]: ES1938 - ESS ES1938 (Solo-1)
ESS ES1938 (Solo-1) rev 0, irq 9
1 [2496 ]: ICE1712 - TerraTec EWX 24/96
TerraTec EWX 24/96 at 0xa800, irq 11
With the first card everything works fine.
Any ideas?
If someone already got a Terratec EWX 24/96 card running,
please share your knowledge with me.
Thanks,
Karsten
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
