D R, Hi. Actually, I tried that last night, but I didn't load the snd-hammerfall-mem. It complained about some sort of missing references. I'll give this a try later today. Thanks.
I haven't tried amixer. I did try alsamixer and received a message 'no mixer elems found', or something to that effect. These are great inputs. Do you have the card yourself? Thanks, Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of D R Holsbeck Sent: Tuesday, December 10, 2002 11:06 AM To: [EMAIL PROTECTED] Cc: PlanetCCRMA; Ardour; Ardour-User-List; [EMAIL PROTECTED] Subject: [ardour-dev] Re: [linux-audio-dev] HDSP 9652 Users - Request for info have you tried doing it manually? modprobe -v snd-hammerfall-mem modprobe -v snd-hdsp what happens? Make sure you load the snd-hammerfall-mem modules before any other module. also you will have to set the output levels on the channels. If you run the command "amixer contents" you should see something like numid=11,iface=MIXER,name='Chn',index=1 ; type=INTEGER,access=rw---,values=1,min=0,max=65536,step=1 : values=0 one for each of the 26 channels, index=(1-25). You can set the volume with the following script #!/bin/bash for i in $(seq 1 26);do amixer -c 0 sset 'Chn',$i 85% done if all this goes well you should be ready to go. If you dont get any output, but everything works ok, try setting up the card, then do a warm reboot (ctl-alt-delete) and set it up again. On Tue, 2002-12-10 at 12:18, Mark Knecht wrote: > Hi, > I would like to request that if there are any users of the new RME HDSP > 9652 card that are able to successfully install and use this card, would you > please get in touch with me and let me know what your system configurations > are? I understand that there are at least a couple of you out there > somewhere. Please let me know what distribution, kernel, C compiler, Alsa > revision and anything else you think might be important. > > Using the PlanetCCRMA flow I am unable to get this card configured and > running. We believe that we have patched the Alsa layer correctly to add the > 0x64 check but I am still unsuccessful. > > Thanks in advance. > > With best regards, > Mark -- [EMAIL PROTECTED] Did you know that if you took all the economists in the world and lined them up end to end, they'd still point in the wrong direction? ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ ardour-dev mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/ardour-dev ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
