At Tue, 26 Nov 2002 12:15:08 -0500, Oleg wrote: > > Hi > > I'm using an ACPI-patched 2.4.19 kernel [1] and the development release of > ALSA drivers. The problem I'm experiencing is that even with maximum "vol" > and "pcm" settings, the sound is not nearly as loud as under Windows XP. > Additionally, when the "vol" and "pcm" controls in aumix are close to the > maximum (or e.g. "pcm" is at 100%, and "vol" is higher than ~ 50%) the sound > is quite distorted. Any ideas on how to fix this? System specs attached [2]
could you show the exact ac97 chip model? you can get it from /proc/asound/card0/ac97#0. some codecs overload at the value 30 and 31 (max 31). if your codec is one of them, then the distortion problem is because of it. Takashi ------------------------------------------------------- This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
