Hi, On Tue, Nov 26, 2002 at 12:10:33PM -0800, [EMAIL PROTECTED] wrote: > Message: 1 > From: "Metivier, Todd" <[EMAIL PROTECTED]> > To: 'Frans Ketelaars' <[EMAIL PROTECTED]>, > [EMAIL PROTECTED] > Subject: RE: [Alsa-user] Error inserting snd-intel8x0 module into the kern > el space (RH 7.3 , Intel Xeon w/AD1885 codec) > Date: Tue, 26 Nov 2002 14:31:35 -0500 > > > (1st) Problem solved. > > Frans Ketelaars noted that I had two OSS/Free modules loaded (i810_audio and > ac97_codec). He recommended removing them. I did that (with rmmod) and then > was able to successfully load the snd-intel8x0. After that the install > proceeded without a hitch. Thanks for the feedback Frans. > > > One add-on question: I can play sound through the built-in PC speaker now > and control the volume using alsamixer. However, the system bell (beep) > remains very faint and is not affected by the mixer settings. I need to be > able to boost the level of this beep and would like to do so using the > internal speaker. Does anyone know if/how this can be achieved? Should the soundcard be able to modify PC Speaker (err: bell) volume ? If so, then the mixer interface of the intel8x0.c driver for this case is broken. Try playing with some other mixer bits/regs instead to check whether this modifies anything...
Andreas Mohr, PCI168 and ALS4000 hacker :-) ------------------------------------------------------- This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
